Rotel Question

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Maykel
    Junior Member
    • Nov 2003
    • 1

    #1

    Rotel Question

    Hi there!

    I'm getting a bit confused by now and I'm hoping that someone can give me a good bit of advice here.. In Holland we don't have that much experts on Rotel equipment since it is a whole lot more expensive than in the US..

    Basically I'm looking for a new system that has both A/V and (excellent)stereo qualities in it. I was told I should look voor an amp that seriously drives the speakers (lots of current) instead of being misled by huge amounts of Watts in the specs. NAD or Rotel would be a good choice. Both brands seem OK to me, but I like the Rotel series a bit better.. they just have this firm, high quality thing over them.

    OK.. is it safe for me to settle for the RSX1055/RDV1060 (player) combo when I want a high quality stereo sound or should I get at least the 1065 or perhaps even a separate power amp? And if the answer should be 'separates', are the pre amp qualities of a 1055 good enough of is there a real difference with those of the RSP1066? In other words.. is the difference in price of a 1066/1075/1080 (tuner) compared to the price of a single 1055 or 1065 worth the difference in sound?

    I have to say I haven't really made up my mind yet when it comes to the speakers.. Listened to some Totem models (Staff) and they really appeal to me. B&W 600's are a bit 'hollow' IMHO. Had the opportunity to listen to the new 704's but they just came out of the box and weren't broken in yet so I can't fairly judge them. The mid section seemed great tho.

    Should I also consider NAD? (T762 w/ 752 player i.e.)

    A lot of thanks in advance for any suggestions or comment!

    Greets from (rainy) Holland

    Maykel
  • Andrew Pratt
    Ultra Senior Member
    • Aug 2000
    • 16478

    #2
    The 1055 paired with a good rotel power amp is definatly a better choice then the 1065 for music. The 1055 has enough power for most surround speakers but adding a nice 5 or 2 channel amp for the mains is a great way to improve its 2 channel performance.

    As for the 1055 vs 1066 look back a few threads someone else was asking the exact same question




    Comment

    • mazuly
      Senior Member
      • Feb 2003
      • 238

      #3
      Hi,

      I do agree with Andrew regarding the amp part, and just have another comment to add.

      RDV-1060 will be an excellent player for movies and DVD-A disks but the Rotel CD players will outperform it for 2 channel music playback. RDV-1060 will sound better than most DVD players and budget CD players out there but it will not be as good as a good CD player for 2 channel music. I know that since I own a RDV-1080 and have tested it against RCD-1072 (mind you I did not do it at my house going through my RSP-1098 ). The analog sound of the RCD-1072 was quite better than that of RDV-1080.

      So, if the 2 channel music sound is important to you, then you should also look at a good CD player to go with your system as well.

      Good luck,
      Maziar

      Comment

      Related Topics

      Collapse

      • steelgtr
        1055/1065 Noise Levels?
        by steelgtr
        Hi

        Just wondering how quiet the receivers are with nothing going on? One of the reviews of the 1065 I read said the noise floor wasn't the greatest. Any hiss going on with the volume turned up and no signal present?

        thx

        bob
        04 May 2003, 09:46 Sunday
      • Erik
        noise floor on 1055
        by Erik
        I read that there was some more noise floor on the 1055/1065. But how bad is it? Because in my house the back speakers are not far away from my ears (1 m).
        My last receiver (yamaha) i dropped because there was always a soft hissing on the back channels (not on the front) even when there was...
        27 October 2003, 06:45 Monday
      • spacey
        Rotel 1065 v. 1055 v. 1066
        by spacey
        All,

        I am seriously considering the purchase of a Rotel 1065 receiver, and have been reviewing the posts on this forum. I note that there is a lot of info on the 1066+Amp, and 1055, but relatively little on the 1065. I will be using it with B&W N804, N805, and HTM2.

        ...
        07 February 2003, 17:32 Friday
      • Glen1
        RSX1055 for 2 ch and compared to 1065 and later models
        by Glen1
        Hi Guys,
        I have posted in the past about Rotel but ended up with a Primare ht amp which I did like but was frustrating to use and frustratingly unreliable so it's been sold and I'm back to Rotel again.
        My plan is to have a 2 ch and surround using the same speakers but with a ht amp...
        05 August 2005, 03:58 Friday
      • Arnold van Oostrum
        RSX-1065 Issues
        by Arnold van Oostrum
        Like the RSP-1066/RSX-1055 the RSX-1065 also has some point that need to be enhanced or fixed.

        The RSX-1065 has some flaws in decoding the sound format.
        1) There seemes to be no difference in normal DD5.1 and DD5.1 EX sound. With both formats the RSX-1065 uses the CB speakers....
        07 September 2002, 19:06 Saturday
      • Loading...
      • No more items.
      Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"