Frank T. question to 12v trigger ???

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • lcajiga
    Member
    • Aug 2003
    • 83
    #1

    Frank T. question to 12v trigger ???

    Frank, you asked a question regarding the 1098 12v triggers and I answered the following. Haven't seen you around since. Did you tested it?

    Frank, you have a solution for your current issue right now. If amps for both surrounds and back speakers (#2 and #3) always go together, then the 1070 have a trigger IN and OUT where you may piggy back a cable from the #2 to #3 and turn them on at the same time. Then for video input you activate trigger #1 and #2. The #1 will activate the amp for L/C/R and the #2 will activate the 1070 amp. for surrounds that will also trigger the 1070 amp. for the back speakers. Then the trigger #3 will be for the SACD material that will trigger the 1070 amp. for those speakers.



    Regards,
    Luis

    http://www.luiscajiga.com/HT.htm


    "It is not what you see and hear...it is how!"
    Regards,
    Luis

    http://www.luiscajiga.com/HT.htm

    "It is not what you see and hear...it is how!"
    Tags: None
      • Bottom
    Previous template Next

    Related Topics

    Collapse
    • adrian carreon
      12v trigger question...
      by adrian carreon
      Hello guys,

      I've been searching this kind of question regarding on 12v trigger it seems that most of the topics is about RB-1080 and getting some problem like bad fuses, L&R ch not working due to resistor, caps and etc. Just wondering if there's anyone here encounter same problem...
      01 May 2006, 18:24 Monday
    • RichardB
      Rotel 1570/1575 12v trigger problem
      by RichardB
      Hi,

      I have recently picked up a Rotel 1570/1575, and I am having a few problems with the 12v trigger between the 1570/1575. I am unable to get the 1575 to power on while using the trigger when turning the 1570 on. I have the trigger cable connected to trigger out 1 on the 1570, and the...
      22 July 2010, 08:19 Thursday
    • whmacs
      12v Trigger Sanity Check
      by whmacs
      Hi all,
      I recently had a new home threatre installed which consists of my current Onkyo 787 receiver acting as a processor and new Rotel RMB-1075 and RB-1070 providing the amplification for a 7.1 setup (which sounds fantasic btw). The problem being that my Onkyo doesn't have a 12 volt trigger...
      13 November 2003, 21:26 Thursday
    • cmr15
      Using 12v trigger to run accessory fans
      by cmr15
      I've got a 1067 which runs rather hot, and I'm aware that that's the norm. I'm about to place it in a custom wall unit and need a little info regarding the use of fans and a 12v trigger.

      What I'd like to do is use 2 accessory computer fans to circulate the air. One would pull in air...
      14 March 2005, 17:37 Monday
    • Audio Junkie
      RB1091 12v trigger replacement
      by Audio Junkie
      Hi All, my first post! I'm a long time Rotel fan
      I have 2 RB1091 amps which I got a deal on from my local dealer several years ago. At the time he said the 12v triggers weren't working. At the time this wasn't a problem for me. However since upgrading my system late last year I now want to...
      21 January 2021, 16:26 Thursday
    • Loading...
    • No more items.
    Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"