DTS Bug

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • m.w.coater
    Junior Member
    • Sep 2003
    • 6
    #1

    DTS Bug

    I have just had my 1098 for about 3 weeks and have not tried to play a DTS DVD to check on the trouble you have. But I have tried to use DTS neo-6 to compair it to PL-II with everyday digital cable and HD cable and it will not work with the SPDIF (Coax) from the cable box. It will if the signel is from one of the analog channles but not from the digital ones. I have set the input default on the 1098 to Neo-6 but with any digital signal PL-II is all that comes on. Is this another DTS bug or is Neo-6 a analog format only?

    Dont know if this is the correct thread for this topic but if it is a bug then I hope a software fix is coming.




    Steve
    Steve
    Tags: None
      • Bottom
    • m.w.coater
      Junior Member
      • Sep 2003
      • 6
      #2
      Wanted to get this on the same thread as the upgrade but screwed up will jut leave it here.




      Steve
      Steve
        • Bottom

        Comment

        • Andrew Pratt
          Ultra Senior Member
          • Aug 2000
          • 16478
          #3
          I'll try that tonight and see what my 1098 does. I've only ever applied Neo to my DSS which is an analog feed.




            • Bottom

            Comment

            • Tha Freak
              Senior Member
              • Jul 2003
              • 385
              #4
              same here with my RSX-1055...

              when a Digital channel from my cable company...only choice between: DPL-II (any of the 3 settings), Dolby 3CH Stereo, and 2CHStereo...

              I cannot choose any of the ambiance mode, DTS-Neo...just the one mentionned above...

              same for my DVD that are DD2.0




              - - - - - - - - - -

              "Are you gonna bark all day little doggy?...or are you gonna bite?
              -Mr. Blond in Reservoir Dogs
              - - - - - - - - - -

              "Are you gonna bark all day little doggy?...or are you gonna bite?
                • Bottom

                Comment

                • Kevin D
                  Ultra Senior Member
                  • Oct 2002
                  • 4601
                  #5
                  Makes sense to me. The signal coming over is Dolby Digital, whether 2.0, 1.0, or 5.1..

                  I'm sure Dolby has something to say about what kind of post-processing can get done.

                  Also the chip probably has an PLII extension that is applied directly to the incoming DD signal. To run NEO on it would require the 1098 to convert the DD signal in to normal stereo and then send it back through the decoder to apply DTS..

                  Don't think this one's a bug..

                  Kevin D.
                    • Bottom

                    Comment

                    • m.w.coater
                      Junior Member
                      • Sep 2003
                      • 6
                      #6
                      Thanks for the info. I just wanted to see which is better Neo or PLII. I am currently using the 1098 in a 5.1 set up so the bug with the DTS EX will not be a problem for me now. Hope to 7.1 in the next few months.




                      Steve
                      Steve
                        • Bottom

                        Comment

                        • Azeke
                          Super Senior Member
                          • Mar 2003
                          • 2123
                          #7
                          Steve,

                          I am currently running the RSP-1098 in 7.1 and to this date have not experienced any problems with decoding DTS-EX, however since my conversion to 7.1 is a recent one, I am still testing. I will provide feedback if I experience issues.

                          Regards,

                          Azeke
                            • Bottom

                            Comment

                            • mkoreiwo
                              Junior Member
                              • Sep 2003
                              • 4
                              #8
                              I have a RSX 1055 and run the optical out from my Philips DVR... On non dolby digital programming, i can change the signal processing on the RSX. When there is a Dobly digital program, the signal is processed as such, and you cannot change it... At least that is what I have observed.

                              I don't think it is a bug...




                              Mike K.
                              Mike K.
                                • Bottom

                                Comment

                                • Andrew Pratt
                                  Ultra Senior Member
                                  • Aug 2000
                                  • 16478
                                  #9
                                  Well Kris Cofn and I played with my 1098 last night and I've got an even stranger problem...mine won't play DTS at all! It always reverts to pro logic II instead of any DTS mode. I'm going to install the new firmware and see if that fixes it. I'm also getting some major static when watching my TV from my Bell DSS receiver that goes away when I select a new surround mode...only to reappear a few minutes later. I'm not sure what that is but we'll see if the new firmware addresses that.




                                    • Bottom

                                    Comment

                                    • Andrew Pratt
                                      Ultra Senior Member
                                      • Aug 2000
                                      • 16478
                                      #10
                                      Well as usuall the simplest answer was the right one....my dts setting in my denon 1600 reverted back to pcm when i unplugged it when the 1098 came in ops: it now detects dts and dts-es properly at least with gladiator and twister




                                        • Bottom

                                        Comment

                                        Previous template Next

                                        Related Topics

                                        Collapse
                                        • Kevin D
                                          1098, 1068,1067, & 1056 owners, need you to test a bug.
                                          by Kevin D
                                          I've found a DTS bug on a 1068 I was installing the other day. I recreated it on our store 1068, and even my home 1098. Rotel is looking into it, but I'm not sure how seriously. As people have time, if you could do a test for me I would appreciate it.

                                          Play something in DTS. DTS music...
                                          04 December 2004, 13:49 Saturday
                                        • microfast
                                          Still a DTS bug on the v1.1.6 - 1098
                                          by microfast
                                          If you do set a 5.1 speaker conf. and listen a DTS96/24 with 6.1 matrix embedded source ( Tomb Raider dvd ) on the display is displayed only DTS.

                                          Where is the decoding of the DTS96-24 ?

                                          Only setting the speakers in 7.1 conf. the display say DTS96/24+ ext matrix, and this...
                                          06 November 2003, 07:40 Thursday
                                        • DrJRapp
                                          DD+/DTS HD on 1098/1068
                                          by DrJRapp
                                          Does anone have any word on wether Rotel will be offerring software updates to the new formats? Since the bitrates are not higher than required for DTS 24/96 there should be sufficient processing power in both the 1098 and 1068 to handle the new formats.
                                          16 April 2006, 11:24 Sunday
                                        • len73
                                          New DD and DTS HD - RSP-1098 still a good choice ?
                                          by len73
                                          Hello everyone...

                                          As you probably have noticed, it seems that the new standard HDMI 1.3 has been adopted recently.

                                          I have read manytimes that ROTEL was waiting for this new standard to be adpoted before lauching new products.

                                          As I am currently building a...
                                          24 June 2006, 02:52 Saturday
                                        • SL Boy
                                          DD and DTS bug in 1068
                                          by SL Boy
                                          I have the bug referred to in the thread below in my 1068. I do not have centre front or centre rear speakers.

                                          http://www.htguide.com/forum/showthread.php4?t=10555

                                          Does anyone know if this has been fixed in the recent firmware upgrades or whether Rotel has even acknowledged...
                                          27 March 2005, 10:11 Sunday
                                        • Loading...
                                        • No more items.
                                        Working...
                                          Searching...Please wait.
                                          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                                          Please push the back button and reload the previous window.'
                                          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                                          Please push the back button and reload the previous window.'
                                          An internal error has occurred and the module cannot be displayed.
                                          There are no results that meet this criteria.
                                          Search Result for "|||"