Destructive RSP 1098
Please be warned, this is long apologies all round!!!!
Having only recently moved to Rotel from Denon. I quickly made a dash back home to set up my newly arrived RSP 1098 with the 1075 power amp. What a combo! However, before this, I updated, well I thought I was updating the new Rotel by using the the updates on their website. However, for some stupid reason, I only updated flash updates 3 and 4 and not 1 and 2. I know, I know, I'm stupid and naive. When it came to updating the system using the MTTY software, there was nothing, then five minutes later, there was around 100 lines of dribble
Once that had done, I switched off my Rotel and powered up, but no joy, it would not power up in standby mode. I set the switches back to off and thus enabling power up in standy. I thought nothing of it and proceeded to set up my new gear. Plugging everything where it should go and all excited like a child at Xmas, I turned on the processor and amp and cranked up the volume,but nothing (no, mute was not on lol). Hmmm I thought, so I unplugged all the leads and proceeded to try subwoofer only just in case my power amp was the problem, but again nothing. I can't even get a test tone with the subwoofer, it just goes to test tone and then switches back to the main menu. Grrrrr, I was frustrated, but kept going. Bugger it I thought and put on a movie. The movie worked fine, however there was no sound Even before the movie started there was a constant flashing of DPLII on the screen, around every 3 seconds. To add to my woes, on the TFT screen when the menu is activated, the input of digital and analogue flashes between the two, like it can't make up its mind which one is plugged in. ( I have tried three different digital connections with different leads, and still no joy - I even tried the leads in my old setup just to make sure they were not the culprit). All I can say is HELP!!!! I have tried downloading and resetting everything again,but with no joy and its beginning to frustrate the hell out of me. As when I try to download the flash updates 1 through to 4, it gets to the last bit and turns off the processor regardless of the position of the dip switches. Mind you,I can't power up the processor when they are on. I just ain't got a clue, being new and all to the Rotel scene, so my wife suggested this forum and one is hoping someone out there can help, or lead me in the right direction.
Kindest Regards from a sad and lonely rotel owner
Mark
Having only recently moved to Rotel from Denon. I quickly made a dash back home to set up my newly arrived RSP 1098 with the 1075 power amp. What a combo! However, before this, I updated, well I thought I was updating the new Rotel by using the the updates on their website. However, for some stupid reason, I only updated flash updates 3 and 4 and not 1 and 2. I know, I know, I'm stupid and naive. When it came to updating the system using the MTTY software, there was nothing, then five minutes later, there was around 100 lines of dribble
Once that had done, I switched off my Rotel and powered up, but no joy, it would not power up in standby mode. I set the switches back to off and thus enabling power up in standy. I thought nothing of it and proceeded to set up my new gear. Plugging everything where it should go and all excited like a child at Xmas, I turned on the processor and amp and cranked up the volume,but nothing (no, mute was not on lol). Hmmm I thought, so I unplugged all the leads and proceeded to try subwoofer only just in case my power amp was the problem, but again nothing. I can't even get a test tone with the subwoofer, it just goes to test tone and then switches back to the main menu. Grrrrr, I was frustrated, but kept going. Bugger it I thought and put on a movie. The movie worked fine, however there was no sound Even before the movie started there was a constant flashing of DPLII on the screen, around every 3 seconds. To add to my woes, on the TFT screen when the menu is activated, the input of digital and analogue flashes between the two, like it can't make up its mind which one is plugged in. ( I have tried three different digital connections with different leads, and still no joy - I even tried the leads in my old setup just to make sure they were not the culprit). All I can say is HELP!!!! I have tried downloading and resetting everything again,but with no joy and its beginning to frustrate the hell out of me. As when I try to download the flash updates 1 through to 4, it gets to the last bit and turns off the processor regardless of the position of the dip switches. Mind you,I can't power up the processor when they are on. I just ain't got a clue, being new and all to the Rotel scene, so my wife suggested this forum and one is hoping someone out there can help, or lead me in the right direction.Kindest Regards from a sad and lonely rotel owner
Mark
Comment