2-channel problem - left channel is dead :(

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • OakIris
    Member
    • Dec 2003
    • 80
    #1

    2-channel problem - left channel is dead :(

    I have the RSX 1055 receiver with the main front speakers powered by an RMB 1075 power amp. I just finished my turntable set up (though I need to make more adjustements) and tried playing a record. I have the turntable phono stage connected to the multi-input connectors on the back of my 1055. The right speaker was fine, but the left speaker had no sound at all. I thought there might be something wrong with my turntable set up, but when I switched to my CD player (RCD-1072) with 2 channel sound....still nothing from the left speaker.

    I checked all cable connections, everything was fine. So I then switched out of 2-channel to Dolby, DTS, etc. - great sound from all speakers. What is wrong with my 2 channel set up? What could have caused this problem (I swear it was working the last time I used it with my CD player!)
    Tags: None
      • Bottom
    • OakIris
      Member
      • Dec 2003
      • 80
      #2
      Anyone?? It can't be a fuse or cable or connector problem since all channels work when any of the other modes are selected - right??

      Holly
      Last edited by OakIris; 01 April 2005, 13:16 Friday.
        • Bottom

        Comment

        • OakIris
          Member
          • Dec 2003
          • 80
          #3
          Here I am talking to myself again.. :P

          Problem fixed Friday evening after I checked the test tones for each speaker. I had the cables from the pre-amp connections on the receiver to the amplifier hooked up wrong. ops:

          Holly
            • Bottom

            Comment

            • junior77blue
              Senior Member
              • Nov 2004
              • 635
              #4
              We've all made that mistake sometime or another...
                • Bottom

                Comment

                • Azeke
                  Super Senior Member
                  • Mar 2003
                  • 2123
                  #5
                  Good Job. Glad to see you found the problem, Cable 101.

                  Regards,

                  Azeke
                    • Bottom

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • OakIris
                      Rotel RSX 1055 and turntable connections
                      by OakIris
                      I am adding a Teres turntable to my system - I have been out of the vinyl world for over 20 years but never could stand to get rid of my record collection. Now I'm ready to get back into the world of analog again.
                      I have a phono stage (Holfi Battriaa Signature) already, I'm still putting...
                      11 February 2005, 14:53 Friday
                    • BWLover
                      Turntable Left Channel Out
                      by BWLover
                      Hello everyone. I have a Pro-Ject Debut Carbon w/2M Red cart. My left channel is nothing but hum. I tried moving the ground cable from the pre amp to the power conditioners main ground. Tried using the turntable without the ground cable. Tried re balancing the tone arm. Looked at all the connections...
                      11 August 2013, 20:11 Sunday
                    • mitch57
                      Parasound Halo A51 5th Channel Problem.
                      by mitch57
                      Well it looks like my Halo A51 Amp's 5th channel is on it's way out. I started noticing the the 5th channel, which is the surround right channel, didn't seem to have much of a signal. I first noticed it while listening to DVD-A and multi channel SACDs. It just didn't seem like I was hearing much...
                      21 May 2006, 18:56 Sunday
                    • Stoopalini
                      Acdom 545 -- Left Channel Not Working ....?
                      by Stoopalini
                      I bought an Adcom GFA-545 about a month or so ago and have been using it to power my 100 Watt DVC 12" Realistic Ported Sub. I bought the amp for a Sonosub project that has been put on hold until my 12" Shiva shows up.

                      Yesterday, 2 Aura Bass Shakers showed up and I finally got...
                      30 August 2000, 19:15 Wednesday
                    • ajpoe
                      Feedback problem with Y adapter
                      by ajpoe
                      I am using an Onkyo receiver to power my 5.0 system. I am not using the .1 channel because I have 4 powered subs... one on each front and one on each surround. I also have a TST in my couch which I am running full range off the front left and right preouts of the Onkyo. My problem: when I hook up the...
                      01 July 2004, 14:46 Thursday
                    • Loading...
                    • No more items.
                    Working...
                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"