Finally pulled the plug! Thanks.

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • dpmckenzie
    Junior Member
    • Aug 2003
    • 14

    #1

    Finally pulled the plug! Thanks.

    I've posted a few lately in my quest for a new receiver and got great info from folks here. Thanks. (I started the NAD 762/Rotel 1065/Pioneer thread on AVS Forum and that gave me a lot as well.)

    And just when I though it was the 1065, my dealer gave me a very generous offer on the 1066/1075 combo. So, yes, Andrew, I went with your #1 recommendation.

    I'm only in the middle of trying to get these babies going, but so far, very good. Even making my own cable and upgrading the firmware was a breeze.

    I'm sure I'll be around as I explore the Rotel world. So I just wanted to express in advance my appreciation to everyone for sharing your knowledge and experience.

    D
  • Danbry39
    Super Senior Member
    • Sep 2002
    • 1584

    #2
    dpmckenzie,

    That was some thread over at AVS.

    Congratulations on the new Rotel gear and welcome to the forum.




    Keith
    Keith

    Comment

    • Kevin D
      Ultra Senior Member
      • Oct 2002
      • 4601

      #3
      Welcome!

      Since you went with the 1066, it will be that much easier to upgrade to the 1098 in a few months..

      Kevin D.

      Comment

      • ejfiii
        Member
        • May 2003
        • 87

        #4
        I agree about that thread and welcome dpmckenzie. Not many car fans over there on AVS. :roll:

        E. J.




        My HT
        My HT

        Comment

        • skipm
          Senior Member
          • Jun 2003
          • 198

          #5
          Dwayne-

          Welcome! Last time I looked that thread is still going over there. It was starting to get a little deep so I had to check out. Enjoy your new equipment. Let us know if you have any questions.

          -Skip

          Comment

          • aud19
            Twin Moderator Emeritus
            • Aug 2003
            • 16706

            #6
            That thread is a monster come to life! ...lol
            Congrats on the gear ... again ... lol

            J.R.
            Jason

            Comment

            Related Topics

            Collapse

            • Arnold van Oostrum
              RSX-1065 Issues
              by Arnold van Oostrum
              Like the RSP-1066/RSX-1055 the RSX-1065 also has some point that need to be enhanced or fixed.

              The RSX-1065 has some flaws in decoding the sound format.
              1) There seemes to be no difference in normal DD5.1 and DD5.1 EX sound. With both formats the RSX-1065 uses the CB speakers....
              07 September 2002, 19:06 Saturday
            • spacey
              Rotel 1065 v. 1055 v. 1066
              by spacey
              All,

              I am seriously considering the purchase of a Rotel 1065 receiver, and have been reviewing the posts on this forum. I note that there is a lot of info on the 1066+Amp, and 1055, but relatively little on the 1065. I will be using it with B&W N804, N805, and HTM2.

              ...
              07 February 2003, 17:32 Friday
            • ejfiii
              How can Power Failure cause 1065 to lose all settings?
              by ejfiii
              How in the world can this happen. I leave for work at about 7:30 am and leave the plasma and 1065 on so my wife can watch tv during the day. Long story, but I havent got the ir system working yet, so I cant teach her to turn everything on and off yet.

              So anyway, I come home from work...
              07 July 2003, 20:35 Monday
            • stevkar
              RSX-1055 v. NAD 762: DVD-A/SACD & HD-TV
              by stevkar
              I am happy owner of Rotel CD player, new to home theater. I was all set to get RSX-1055 AV-Receiver when I saw some listings (Home Theater magazine's and the Sound and Vision magazine's Buyer's Guide for 2003) that confused me...

              1. Does the RSX-1055 truly and fully support DVD-A and...
              22 January 2003, 11:32 Wednesday
            • ejfiii
              is this guy Correct? 1055/1065 use old DACs?
              by ejfiii
              Third post from the bottom. Hope its not illegal to link to other forums for questions like this.

              Other forum thread

              Thanks,

              E. J.




              My HT
              13 August 2003, 10:24 Wednesday
            • Loading...
            • No more items.
            Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"