This is no April Fools Joke folks. During the next couple of days, we will be picking a day to migrate HTGuide to a new server. We will have the same reliable service we have always had, as we are not changing Hosting Services, only moving to a new updated state of the art server! Support is working to coordinate things right now.
We will announce the date of migration from old server to the new server in due time. We hope to minimize downtime while the DNS propagates to our new IP address, and service is restored. But some downtime is inevitable.
Interested if anyone has an RB1080 or 991 teamed up with either RC1070 or older pre-amp such as RC995. In doing research, a used RC955 costs about same as a new RC1070. Wait are the differences and sonic characters on either pre-amp? Any info greatly appreciated. Tyring to make a hard decision on investing soley 2 channel or keep the HT configuration up and running and still utilize 2 channel listening
I'm currently using the 991 amp and 1070 preamp and like the combo. The RC-995 has balanced XLR outputs and balance control knob whereas the RC-1070 does not. The 1070 has a defeatable contour switch (I rarely use but has come in handy before). Aesthetically the 1070 is a better match if that's important to you at all. Sonically I couldn't really justify the difference in price when choosing between the two. In direct comparison the 1070 had a slightly blacker, quieter background. They are both pretty simple and straightfoward preamps and either way you should be happy.
The RC-995 is a discrete Pre amp, it uses transistors in the main signal path. The power supply is big enough for a small power amp and it has 2 diode bridges which I suspect means it has individual supplies for each channel. If your into vinyl it has mm and mc switch. So top design and components. The RC-1070 uses op amps in it's signal path, a good power supply and top components. The RC-995 is the better design and should sound better but the RC-1070 is newer and easyer to tweek. Both would be good especially with a matching rotel amp. I have the RC-995 with RB-1070 amp and they sound great to me.
I have, lying around, a rotel RB-1070 and an older RB-991 amp.
I have the opportunity to get a used pair of 804Ns at a good price. Was thinking of using these to bi-amp the B&Ws with the 991 taking care of the lower frequencies and the 1070 handling the upper end....
What's your opinion on Klipsch RF3 & Rotel RB991 power + RC1070 pre. Source as NAD 541i. I found the sound from above combo is bright & loud & not very balanced. My feeling is RB991 may be too much power (200rms/ch) for RF3s, since it's a high efficiency speaker...
I've had this RB 991 for several years as part of a 7.1 home theater system and have had a hum issue that may or may not be a problem.
Using XLRs to the prepro, if I disconnect the right xlr from the RB 991 amplifier, I get a loud hum. Connect it back and hum goes away. Disconnect the...
21 May 2011, 09:30 Saturday
Loading...
No more items.
Working...
😀
😂
🤣
🥰
😘
🤔
🤢
😎
😞
😡
😮
👍
👎
☕
Searching...Please wait.
An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.
Please push the back button and reload the previous window.'
An unexpected error was returned: 'Your submission could not be processed because the token has expired.
Please push the back button and reload the previous window.'
An internal error has occurred and the module cannot be displayed.
Comment