I will be hosting a DD/DTS comparison "blind" test at the house in a few weeks. Now, I want to make this a Logic 7 DTS/DD comparison but I know I'm gonna hear complaints about it not being a fair test if I introduce a factor outside of straight DD/DTS. But is it? If we're talking which has the better overall fidelity, would that really be effected by Logic 7 in such a way as to favor one format or the other. I always listen to DD/DTS DVD music in DTS or DD music mode, and would want the comparison done that way, but again, if we're doing a listener test of the codecs of DTS and DD, would that effect the comparison to the point where it wouldn't be valid. If yes, why. If not, why.
DTS/DD Showdown at the MC-1 Corral
Collapse
This topic is closed.
X
X
-
Tags: None
- Bottom
-
John, I think as long as your performing your test with equal number channels, it's a fair comparison.
Logic 7 is available in DTS or DD, so I don't see it as really favoring either format. Of course, you could also do comparisons with 5 channels to complete your test. Heck, even some 2 channel music only wouldn't be a bad test.
Be sure to let us know how this turns out-
Lex- Bottom
-
Well I will play the devil’s advocate here. When you test DTS vs DD, you will want the least amount of variables in the test. I don’t know how the software in the MC-1 does the matrixing. In other words does the software use the same path or does DTS use a different path then DD. The guys/gals at lexicon might have tweaked the software for one or the other formats. The DVD has five channels and that’s what should be compared. To add logic 7 test after that would be OK but the prime test should be five channels only. Just my opioin.- Bottom
Comment
-
The test will be on 5 channels in either case, as I'm still working on putting together my 7 speaker setup, right now it's L/R/C LS/RS and sub of course. So what we will have that's unique with Logic 7 is 5 speaker enhance, and anything else Logic 7 in general would add to the tonal nature of the sound.
The showdown
is scheduled for Oct. 14th. I'll let you know how it turns out.
- Bottom
Comment
-
-
Related Topics
Collapse
-
by Buzz GoddardJust after TAG McLaren finished the 7 channel THX Surround EX Upgrade, adding Dolby EX, DTS-ES 6.1 Matrix and TAG McLaren Surround 7 to existing AV32R 5.1 processors, Dolby Laboratories announced the introduction of Pro Logic II, the next generation of Dolby Surround Pro Logic decoding technology. Pro...-
Channel: Club Rotel
-
-
by mdrakeI am going to purchase my center channel in the next couple of weeks. I was going to order the CC3 but I am wondering if I should order the MC1's and use them as a center as the image below shows? The logic behind the MC1 centers is so that the center and mains match perfectly. But then again the CC3...-
Channel: AV Chalet and Home Theater Hangout
-
-
by SMiLEYSince I don't have a Dolby Digital receiver yet, what soundtrack should I be listening to on DVD's? I'm using my recently acquired Panasonic RV-80 on my old Sony Pro-Logic receiver (STR-D1090) and it's been good. However, the other day I decided to do a comparison to LaserDisc. I put in the Aliens Special... -
by RickyLast week, I sold my MC1 and one of my Citation 5.1 amps. My 2nd 5.1 amp is going to a friend later this month. I am replacing this wonderful combo with: DC1 version 4.0, Rogue Magnum 66 tube preamp with HT unity gain bypass, Parasound 2200II 250x2 amp, and Parasound 1205A 140x5 amp. For just a couple... -
by ch83575This is only partly audio related, but I really respect all of the people here and I want to hear what you all think. I need an oscilloscope... mostly for school, but also to use on audio projects. I also need a logic analyzer, I am currently planning on specializing in embedded design. The problem...-
Channel: Mission Possible DIY
-
- Loading...
- No more items.

Comment