Ref 30 volume will not increase above -15

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • dwwhitley
    Junior Member
    • Jan 2005
    • 3
    #1

    Ref 30 volume will not increase above -15

    I know this is the 50... sitebut maybe they are similar enough to get an answer.

    I have a ref 30 that the volume has gotten low on. There is no difference between -15 and +15 on my spl meter. I am unable to balance the spl on my speakers now. As I lower the volume below -15 I notice a corresponding decrease, but as I increase the volume above -15 there is not a corresponding increase.

    Help Please.

    don
    Tags: None
      • Bottom
    • dwwhitley
      Junior Member
      • Jan 2005
      • 3
      #2
      Ref 30 volume...addition

      by the way the dynamic range setting is normal; it was one of the first things checked.
        • Bottom

        Comment

        • bubbawilly
          Junior Member
          • Jan 2005
          • 9
          #3
          Wow! I may have to download a manual and check it, but there is a screen in the setup menu to set a maximum level on the zone 1 volume control, and it sounds as if this was somehow set to -15dB. Check the Advanced menu.
            • Bottom

            Comment

            • Wild Bill
              Junior Member
              • Jan 2006
              • 8
              #4
              have you checked the advanced set-up in the menu to see what your max volume is set at? that's the first thing to check. sorry if im stating the obvious and youve already done that.
                • Bottom

                Comment

                • dwwhitley
                  Junior Member
                  • Jan 2005
                  • 3
                  #5
                  A reset to factory settings fixed it.

                  A reset to factory settings fixed it. Thanks for the responses.

                  don
                    • Bottom

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • MustangJeff
                      RSX-1056 Volume control issue
                      by MustangJeff
                      Strange problem that started happening in the past 6 months. The volume control on the front of my RSX-1056 seems to have a mind of it's own.

                      When I increase the volume it works correctly, and the numbers (dB) increase normally.

                      When I turn the knob counter clockwise to...
                      09 October 2012, 14:39 Tuesday
                    • Helier
                      B&K Ref 30 and subs
                      by Helier
                      Hello All!
                      Because of DVD-A (Toshiba SD9200), I have my subs running from the mains out and no sub selected in the menus of both the Ref30 and the Toshiba.
                      I suppose my question is, Am I missing anything with this set up?.
                      The subs are M&K MX100(2), so each one is hooked up...
                      10 January 2002, 11:50 Thursday
                    • Britchie
                      1098 w/1095 Volume Peak...How Loud do you play before Clip
                      by Britchie
                      I have a 1098 with the 1095 Amp. I usually play it loud, at around 75 per the Rotel 1098. I just purchased new speakers (Paradigm ref 100v3) that can handle a lot more power (350WPC) than my old ones.

                      Can I safely go higher than 75? When I audiotioned these the sales rep said 80 would...
                      25 August 2004, 10:24 Wednesday
                    • madmac
                      Phone volume issues?
                      by madmac
                      Hey, has anyone noticed volume issues with their phones recently? I listen to a fair amount of music on my Samsung Note phone and it seems that most times I'm listening at maximum volume and it is ok......but not super loud.

                      With my older phones and various other music players I've had...
                      31 July 2015, 05:52 Friday
                    • scarpi
                      B&K Ref 30 preamp problem
                      by scarpi
                      I have a B&K Reference 30 running software version 2.11. I've been experiencing a problem with the volume. It seems the unit keeps increasing the volume on its own. The display actually changes and shows the volume level increasing from -20 to -15, then -10 etc. Sometimes I've seen it show where...
                      22 July 2008, 20:24 Tuesday
                    • Loading...
                    • No more items.
                    Working...
                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"