Surround backs suddenly cut out?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • nicholtl
    Senior Member
    • Aug 2003
    • 539

    #1

    Surround backs suddenly cut out?

    Usually, in party mode, all 7.1 channels are engaged, despite what the manual says about feeding 2 channel music into 5.1. However, today when I was listening to music, I realized my surround back channels had cut out. I know they are still connected properly, since Club or Concert modes engage them. But party mode no longer seems to feed any signal to them, yet they did only yesterday?

    I tried switching the C2 power off from the rear several times, but still nothing. I've checked my settings too. Is there something I've overlooked? Is this a glitch?
  • Chris D
    Ultra Senior Member
    • Dec 2000
    • 16875

    #2
    A key point here seems to be whether Party mode is a 5.1 mode as listed in the Halo manual or 7.1 by users' experiences. I'd like others to chime in here with what they've found.




    CHRIS
    Luke: "Hey, I'm not such a bad pilot myself, you know"
    CHRIS

    Well, we're safe for now. Thank goodness we're in a bowling alley.
    - Pleasantville

    Comment

    • nicholtl
      Senior Member
      • Aug 2003
      • 539

      #3
      Come on guys, help please? Smalone, starford, david meek etc...can you guys tell me if you're party mode is 5.1 or 7.1?

      Comment

      • smalone
        Member
        • Aug 2003
        • 71

        #4
        Yes... yes.. yes... I am here...

        I posted this in one of the other threads, my C2 plays through all the speakers including the back two when in Party mode.

        It is strange that yours stopped outputting though the back rear speakers... you may want to contact Parasound and see what they have to say...

        Comment

        • nicholtl
          Senior Member
          • Aug 2003
          • 539

          #5
          Yeah, now that you mention it I do recall you saying that you too got music from the 6th and 7th speakers, despite what the manual states. I just called Tim from Parasound, and he said that Party Mode is only designed for 5.1 playback...and that it is 7.1 that is faulty. Whether or not this is the case, it kinda sucks cause I like having music play through every speaker. I have no clue why it cut out, but I know that I want it back!

          Comment

          • nicholtl
            Senior Member
            • Aug 2003
            • 539

            #6
            Ok sorry if I seem like I'm talking to myself, but I wanted to let you guys know that suddenly -- it works again. I have no idea what happened, but now I'm not gonna touch anything for fear of the same problem.

            Comment

            • smalone
              Member
              • Aug 2003
              • 71

              #7
              Yes, yours started working because mine stopped!!! Give me it back!!!

              I did kill breaker that was powering the C2 so that might have caused it to drop out. Will have to mess with it and see if I can get it to do it all the time. First I have to get them back working though.......

              Comment

              • smalone
                Member
                • Aug 2003
                • 71

                #8
                Ok, here is how I got it back so it plays 7.1

                First I changed the C2 to Stereo mode, then I went into speaker size and told it I did not have back speakers and then I exited through all the menus then shut off the C2.

                I then turn back on the C2 and went back in and changed it back to having two small back speakers and then exited out of all the menus and shut off the C2 then turned it back on and then I went back to PARTY mode and now they all work.

                I think you can also do what is listed above and just shut it off once after making the changes and then when you turn the C2 back on it seems to work ok.

                Also if the C2 is in Party mode when power to the unit is cut off you WILL lose your back speakers so then just follow the steps above to get them back.

                I should be getting paid for all of this damn beta testing for Parasound!!!!

                You want to hear a really good one?!?!?!

                I changed the power up and power down menus and the power down says "THANK YOU, WE HOPE YOU ENJOYED THE SHOW"

                Well on the front display it looks fine but on the OSD The "YOU", is "YOUN" with a ~ above the N so it does not seem the like the "," that is in there!

                Explain that one Parasound!

                Comment

                • nicholtl
                  Senior Member
                  • Aug 2003
                  • 539

                  #9
                  Weird...I think all I did was to turn off the C2 via remote control, then turn it on via the front panel power switch, but HELD IT DOWN so it displayed the firmware version etc etc. Party mode worked after that...

                  It sounds like your method probably works as well, which is probably what I'll try if it ever happens again. I think party mode really was just designed for 5.1 playback, but we're somehow tricking the unit into locking between 2 soundmodes, say, natural and club...or something.

                  Comment

                  • smalone
                    Member
                    • Aug 2003
                    • 71

                    #10
                    Well it should get interesting if and when they ever release a firmware update.... :roll:

                    Comment

                    • Chris D
                      Ultra Senior Member
                      • Dec 2000
                      • 16875

                      #11
                      Most interesting--I'll have to keep this in mind if I want to use Party mode! Personally, though, I'm kind of a purist, and probably won't be using any DSP's that add additional sound aspects above the original recording.




                      CHRIS
                      Luke: "Hey, I'm not such a bad pilot myself, you know"
                      CHRIS

                      Well, we're safe for now. Thank goodness we're in a bowling alley.
                      - Pleasantville

                      Comment

                      Related Topics

                      Collapse

                      • sikoniko
                        A Q&A with Dave Nauber from Classe
                        by sikoniko
                        UPDATE: Since we are doing a new Q&A, I thought I would bump this up in case anyone missed it the first time. A good way to see what has already been asked.


                        Hello everyone,

                        As you know, Dave Nauber offered an intimate Q&A with the members of Club Classe....
                        31 March 2009, 19:26 Tuesday
                      • Arneson
                        Modus Operandey
                        by Arneson
                        I have many signal sources and many monitors which makes for a very complex interconnect.
                        Having a system set up so all functions give best performance is one consideration, but theres another.
                        When I sit down on any normal evening to watch a program, news ,weather whatever, I will turn...
                        12 August 2006, 23:56 Saturday
                      • chanlon
                        RSP 1570 Zone Config Question
                        by chanlon
                        Hi there.

                        I have a Rotel 1075 5-CH amp connected to Zone 2 and 3 analog outputs of the RSP 1570 to power zones throughout my home. I'm using a 1077 for my main listening room.

                        I have #2 12 Volt Trigger Output connected to the 1075.

                        The problem I'm having...
                        20 November 2009, 17:38 Friday
                      • Scarp
                        RSP1066 always in 7.1 mode?
                        by Scarp
                        Hi,

                        I've got a 7.1 system hooked up to my RSP1066. I've set the front speakers to large because I dont want to use my sub in 2 channel mode. The surrounds and centre are all setup as being small. And I set the number of back speakers to 2.
                        When I play a Dolby Digital 5.1 encode...
                        31 March 2003, 13:01 Monday
                      • oldbob
                        Student Film part three
                        by oldbob
                        Now we all have learned that at the beginning of each day you are given your pages of the days work. For me that means I can figure out how I am going to utilize my crew and plan my day. The more I can get ahead of the company with pre-lighting the more time I can save production. And in film time is...
                        06 September 2016, 17:26 Tuesday
                      • Loading...
                      • No more items.
                      Working...
                        Searching...Please wait.
                        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                        Please push the back button and reload the previous window.'
                        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                        Please push the back button and reload the previous window.'
                        An internal error has occurred and the module cannot be displayed.
                        There are no results that meet this criteria.
                        Search Result for "|||"