Halo A52 using rca and balanced inputs?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Micke.H
    Member
    • Sep 2004
    • 34

    #1

    Halo A52 using rca and balanced inputs?

    Hi. Can i use lets say all rca for ht sound and use a cd with volyme With the balanced inputs ?
    Best regards Micke
  • Chris D
    Ultra Senior Member
    • Dec 2000
    • 16875

    #2
    Hey, Micke, if you look at the back of the amps, say the A52 at http://www.parasound.com/halonew/ima...2_rear_300.jpg, you'll see a switch labeled "balanced/unbalanced". So you can only use one at a time.

    So to answer your question, yes, you could do that, but you'd have to reach behind the unit and flip the switch every time between the RCA and XLR jacks. (not recommended)

    Also, you'd have to have a pre/pro that you could be selectable with, or use a separate pre/pro for your movies and one for your music as you propose.
    CHRIS

    Well, we're safe for now. Thank goodness we're in a bowling alley.
    - Pleasantville

    Comment

    • Peter Nielsen
      Super Senior Member
      • Sep 2004
      • 1188

      #3
      Correct me if I'm wrong, but don't all the Halo A-series amps feed the XLR input out through the RCA, so that you can 'daisy chain' two amps?

      Of course this means that your CD output (XLR) would be reversely fed into the RCA outputs of your HT amp... = NOT GOOD!

      Peter
      Last edited by Peter Nielsen; 14 February 2006, 09:34 Tuesday.

      Comment

      • Micke.H
        Member
        • Sep 2004
        • 34

        #4
        Okidoki, then i know..Thanks

        Comment

        Related Topics

        Collapse

        • alpina
          Balanced XLR vs RCA's - what's the deal?
          by alpina
          hi guys,

          finally geting around to the wiring end and am wondering what the deal is between balanced XLR vs RCA? What makes one better than the other and what are the real world sonic differences between the two?

          cheers,

          julie
          29 April 2006, 00:36 Saturday
        • wildfire99
          Halo Ax1 Balanced Inputs Level Question
          by wildfire99
          This may be an Anthem issue or a Parasound one, but I'm thoroughly confused about it. Here's the question:

          I recently switched my interconnects for my system (Anthem AVM30, Halo A21 and A51 amps, plus Behringer BFD for the sub) from RCA to XLR. I dutifully switched the amps to 'Balanced'...
          16 January 2006, 00:39 Monday
        • cameronl
          xlr setup question
          by cameronl
          hi there, I'm trying to eliminate hiss from my setup. Does anyone know whether it is possible to do the following.

          (Source XLR Out) > XLR cable > (C2 XLR In)

          (C2 RCA Out) > RCA cable > (A52 RCA In)

          thanks for your time.

          CaM
          04 October 2005, 03:57 Tuesday
        • toledoguy
          Connecting balanced pre-amp to unbalanced amp
          by toledoguy
          I've got a question, and I think I know the answer, but what the heck. I have decided to spend some money to move from big box store mediocre equipment to higher end seperates. It's a slow process as I research everything that I possibly can before I buy. I have a Rotel RM-1050 to power the front...
          20 October 2008, 12:46 Monday
        • sbank
          Mixing balanced and unbalanced
          by sbank
          Hi All,

          I have a question pertaining to mixing balanced and unbalanced interconnects. My dealer recommends in keeping everything one or the other. (eg all balanced or all unbalanced)

          I currently have a Rotel RB-1080 2-channel Amp for my fronts. I've been using for quite...
          28 June 2004, 09:01 Monday
        • Loading...
        • No more items.
        Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"