Audioquest Gibraltar vs MIT shutgon s3

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • olilugo
    Junior Member
    • Aug 2009
    • 20

    #1

    Audioquest Gibraltar vs MIT shutgon s3

    Hi all, I would like to buy some new cables for my new 804s
    the choices are Audioquest Gibraltar vs MIT shutgon s3.
    I have no experience on neither of the speaker cables. I don't even know what to expect since the websites just don't provide enough information.

    my setup is

    SC-07 (Receiver)
    Sunfire TGA5200
    IC between sc-07 - tg5200 signal cable analog II
    speaker cable - to be purchased.
    speakers: main B&W 804s.

    Does anyone has experiece with similar setups?

    Thanks,
  • htsteve
    Super Senior Member
    • Sep 2004
    • 1216

    #2
    Send an email to LEX (the forum owner). He has Cat Cables. They are very good performers for the money.

    General cable questions are fine. Once we start getting into brand specifics, that muddies the waters and often goes places it shouldn't. The thread may get locked at that point.

    As I said, contact LEX.


    Hope this helps.

    Comment

    • olilugo
      Junior Member
      • Aug 2009
      • 20

      #3
      I was hoping the answers would have been in the erea as
      based on my amp and RCV and my speakers, If I want a bright sound go with brand x, if I want more laidback go with brand Y...

      I actually thought that Cat cables was not in business. at least that is what it says in the website.

      Also I was under the impression cat cables was the best in interconnects, but there was limited selection in speaker cables.

      I will recheck the web site again.

      Thanks!

      Comment

      • audioqueso
        Super Senior Member
        • Nov 2004
        • 1933

        #4
        What are the rules for that now?
        Since CatCables is closed, talking about cables is not taking anything away from a no-longer-in-business sponsor. So can cable brand discussion be talked about now?
        Lex?
        B&W 804S/Velodyne SPL-1000R/Anthem MRX720

        Comment

        • Opus007
          Senior Member
          • Nov 2007
          • 454

          #5
          Send LEX a pm.I am sure he will will work with you and help you out.

          Comment

          Related Topics

          Collapse

          • Jeff
            Benchmark DAC1 & the Rotel RCD-1072 using CAT Cables, Nordost & Audioquest
            by Jeff
            Within the past week, I’ve been able to mix, match and compare the following. Benchmark DAC1, Rotel RCD-1072 using Nordost Red Dawn I/C’s (balanced) and Cat Cables Kingcats RCA’s and Audioquest King Cobra RCA’s.

            The Rotel and King Cobra’s I’ve had for a while, the others are...
            25 November 2006, 23:22 Saturday
          • AmeriPawn
            Classe 30/70 preamp and amp question(s) and more
            by AmeriPawn
            Hi. Thought I would see if anyone here has any experience with this combo? If you didn't have both that's ok as long as you owned one or the other. Or,if you have listened to one and have audible memory of it. This is the combo I have now paired with a pair of B&W CDM1SE speakers. I really enjoy...
            10 September 2010, 07:43 Friday
          • crytklmass
            speaker cable and balanced cables
            by crytklmass
            which speaker cable do you think is my best option, I have the audio quest rockefeller. (they have 2 black cylinders about 6"long that say 36v) my fronts are 8 feet, I could go 10ft for future expansion. my center is 6 ft, but its a tight fit, so I could bump that up to 8 ft. or buy 2 new fronts...
            19 January 2009, 21:52 Monday
          • indyluke
            copper vs. silver
            by indyluke
            Ok, I have a pair of Klipsch RF 7's. Feeding them are a Rotel RSX 1065 and a RCD 1070 CD player. I am looking to upgrade the analog cable connection. The Klipsch are a little forward and bright. My question is which cable would tone them down a little bit, copper or silver. Been looking at Better Cables,...
            30 November 2003, 10:40 Sunday
          • PewterTA
            Cat Cables...here is how you do customer service!!
            by PewterTA
            I know this probably should go into the Cat Cables section, but I thought this would get more exposure being here. Doug, feel free to move it if you want.

            Prologue:
            About 3 weeks ago I ran into a problem where my center channel speaker fell off my shelf I had it on. It was my...
            14 August 2007, 10:20 Tuesday
          • Loading...
          • No more items.
          Working...
            Searching...Please wait.
            An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

            Please push the back button and reload the previous window.'
            An unexpected error was returned: 'Your submission could not be processed because the token has expired.

            Please push the back button and reload the previous window.'
            An internal error has occurred and the module cannot be displayed.
            There are no results that meet this criteria.
            Search Result for "|||"