Tweet
I have some strange noise going out from my N802 tweeter and i'm wondering if the tweeters can be changed.
The noise happened especially on voices.
The noise happened especially on voices.
-
-
Hi,
Absolutely. Two repairs are possible:
1) New cone and voice coil (most likely)
2) New Tweeter (not likley)
Your dealer can do either getting parts from B&W....
Geoff -
some other questions:
1- can i change the cone/voice coil myself ?
2- how much $us for it ?
3- Is it a known issue with the N802's ?
Thx.Comment
-
The cone and voice coil change is relatively simple, but the tweeter exchange involves dissassembly of the mid range unit to get a the tweeter fixing arrangement..
Not to be attempted by the faint hearted.Comment
-
I don't recall the price of the new cone and voice coil but I do remember is wasn't nearly as expensive as I thought it would be.
There is no known "problem" with the N802 tweeters.
JeffComment
-
Mine are roughly 6 years old.
Do you guys have the procedure for tightening/loosening the big bolt behing the mids ?Comment
-
Luckily, those replacement tweeters are only around $90 with shipping. Plus they are very easy to change. :TRobert P. 8)
AKA "Soundgravy"
Comment
-
could i replace my actual cone and voice coil by the 802D ?
Is it much more expensive ?Comment
-
DON'T TOUCH THE BIG BOLT!! :bluezoned: That's used to calibrate of the mid range amoung other things. Unless your mid range is changed out, best to leave that to your dealer.
JeffComment
-
The diamond tweeter on the 802D is around $1000.Comment
-
1000$ for the tweeter or just the cone ? Has someone compared the old N802 and the 802D ?Comment
-
Jlr,
You can't put the diamond tweeter code or the whole tweeter on the older 802 - the cone doesn't fit, nor does the tweeter... Also the crossover for the tweeter isn't compatable...
Re the 802D is is (for most listeners ears) a real step up from the already very good 802... Most rate it as souding better than the older 800 Signature.. And the old 802 was already very good
GeoffComment
Comment