I have a pr of 603s3 that are on a tile floor w/o spikes.Should i use spikes.I know they are used for carpet but what about when speakers are on hard floors.Also would they even make a difference in sound if i use them.Any insight?thanks
-
-
Um...no, don't use spikes on tile floor. you could possibly use some sort of discs with the spikes but not the spikes directly. Unless u don't care about scratchig ur tile. -
I actually dont have a complete set of spikes right now but was wondering if i actually need them.If i did i wouldnt use the pointed ones w/o putting something underneath.But my question is should i use them are they something that would be useful as far as sound is concerned.Right now spkrs are flat on floor no elevation at all.Or how would those small rubber cushions that are used for furniture legs do.Comment
-
I have 704 at the front, on hard tiles, and I started with the rubber (silicone?) feet supplied... then I put the spikes in the front, keeping the rubber feet at the back, providing a significant tilt... and the improvement is noticeable. Not sure if it's the tilt or the spikes, but I would argue that if the spikes are well adjusted, they "hold" the speaker tighter than rubber or carpet, and help provide better bass...
but i'm not an expert, i just like good sound.
as for scratching, good tiles won't scratch, but don't move them around!
ChristopheComment
-
The way I have learned it, spikes are only to be used if you have "soft" floors - ie carpets, wood floor or similar.
On hard floor, like tile, spikes would be meaningless as you cant make the speaker less prone to moving by using spikes. Instead some people argue that you should be using soft material like rubber balls (silicone, or similar material), pads, or one of the many other things that are sold on the after market.Comment
-
Give it a shot
Hey Rick,
Just go ahead and screw those 8 spikes at the bottom of your 603's and c for yourself.
Make sure each 603 doesn't "dance" on its spikes. Think the manual covers even that.
I have a pair of CM4's standing with spikes on tile.
Maybe I should try taking those spikes out and give it a try for a few days. Although, doing it with another pair of CM4's sounded worse to me.
Itai.Comment
-
Hi,
I will be installing hardwood floor in my listening room tomorow. The problem is that the spikes will damage the floor, I was just thinking about something that I can put under the speakers. I was looking on the pictures of your setups, and I saw that some of you who own wooden floors... -
Hi Guys,
I've been reading about different cabinet construction techniques, and I came up with something that might be of interest around here. I'm not the first person to come up with this, but I would like to bring up the idea of ceramic floor tile as a stiffening liner in cabinets.... -
How is tile floor handled as far as speakers go? Spikes with the washer looking feet?
I'll have a sealed 15" sub as well as RS TMWW mains. Maybe a thin rubber mat under the sub so it doesn't walk? -
My new 802D's will arrive shortly, being shipped from MA. How should I set them up on a slightly uneven ceramic tile floor?
The casters would likely rock in most positions.
The spikes sitting on small discs maybe an option.
What have you folks done with... -
Hello. When talking to one of my friends regarding my subwoofer setup - he suggested that I put a piece of carpet under my subwoofer (it sits on ceramic tile floor) and install spikes to elevate it a little bit. He said that this would improve my bass output.
What do you guys think?...
Comment