I call it The Blackbird, a nod to the SR71 Blackbird jet.
It uses the same drivers as the SR71:
SEAS ER18RNX Woofer
SEAS 27TDFC Tweeter
...
30 results in 0.0126 seconds.
-
The Blackbird: a center channel to match SR71's
Here's a center channel I just completed to match my SR71 mains.
I call it The Blackbird, a nod to the SR71 Blackbird jet.
It uses the same drivers as the SR71:
SEAS ER18RNX Woofer
SEAS 27TDFC Tweeter
... -
Dayton RS Center Channel Build Thread
I figured I would give this it's own thread. This center utilizes the exact same drivers as the Khanspires, minus one RS150. This thing is BIG.
Did I say big? I meant HUUUGGGEEEEE....... I didn't realize how big this was going to be.... :E
... -
My Mini-Statement and Center Build
Well, after several months of reading and waiting, my parts finally arrived today overseas. I decided on Mini-Statements and Statement Center Channel, against a suggestion that the Mini's might be a little large for my room size. I've always believed bigger is better, hope I'm not wrong. I can always...
-
Ported Tritrix Center Channel Build (56K WARNING)
This has been posted on PE and edesignaudio.com but thought I would post it up here. I'm much more of a lurker here since I don't feel my audio prowess is quite up to that of most of this board. ;x(
I'm just about to complete it, hence it being in this section and not the Mission Accomplished... -
Statement Center Build
Long story short, I moved to CO from MN in 07 and decided to move back early June due to some situations. Two weeks ago, I have been looking at some receivers and speakers. When I was looking up speakers, I got curious on all the DIY stuff. After reading this forum for a couple days, I decided I wanted...
-
2RCC (Statement Inspired) Center Channel
After build a pair of Statement speakers for my home theater to replace my Paradigm Monitor 7's, I knew I needed to build the Statement family matching center channel. Only there was one problem. In both my current theater and my planned (future) theater, I want to us an AT screen so having a large... -
Another NeoD CC Build
After what seems to be an eternity, I have finally finished a pair of the NeoD CC’s.
I was fortunate enough to get the tweeters before they were hard to get. In fact I like these speakers so much I have 5 extra tweeters for 2 more stereo sets.
As the speakers are destined... -
Biermann Mini-Statement and Center Build
Post 5 (10/16)
Well I have found time over the last few weekends to complete the crossovers for the TL's, and with a day off this week, was able to throw together the whole center channel along with its crossover boards el quicko. I never got any response regarding different resistor or... -
Kirk's WTMW Center Build
I'm building the WTMW Center for use in a system with Khanspires as mains and NataliePs as surrounds. I began the build shortly after completing my NatPs and am building my Khans concurrently. I had a lot of fun and learned a lot while building my NatPs and couldn't wait to get going on my next projects....
-
Seas WWTMWW center
My Seas 3-way wide baffle front speakers need some company!
https://www.htguide.com/forum/showthread.php?t=30421
And its gonna be a pretty big one!
Well I think its big, but maybe you guys are used to see them even bigger........
The front speakers are... -
Working with Curt C on a new Tritrix-based center...
It's going to be an 8 ohm center channel, 22 liters vented, using the same drivers as the Tritrix (Dayton classic 5.25's and Dayton Silky)... the goal is to be as simple and inexpensive as a Tritrix, but achieve better performance as a center than simply tipping a Tritrix on it side.
I'm... -
Speaker-Camp, R&D for Modula NeoD CC speaker variants
Update 9/3/07, the official build thread for these speakers is located in the link below
https://www.htguide.com/forum/showthread.php?t=27218
Here's some guy fine tuning the CAD drawing for the front baffles....
For obvious reasons we can't... -
Help a noob with a center channel
First off this seems like a really good forum. So much so, I realize I'm really over my head. I'm going to have to go to the library and get some books on this stuff.
Anyways here is the plan. My dad needs a center channel build that is no taller than 5" or deeper than 8",... -
Recommendations for Center Channel DIY (reference CC)?
Well guys,
I'm done with my sub design and onto building it....but the DIY mod bug has REALLY hit me hard!!!
NEXT: a big reference level Center channel!!! One that has good depth perception, excellent imaging, audiophile voice reproduction, and some decent extension in the... -
WTMW center ch. RS/28a/150/225 back to the drawing board
What would some pitfalls of the center ch. that has dual woofers along with a midrange and tweeter.My thought is to build a mother of all centers (kind of ) with dual eight inch woofers a six inch mid and a silk dome or textile dome tweeter.
Would I have a huge problem using three of...Last edited by kgveteran; 07 December 2005, 21:12 Wednesday. Reason: 3 threads merged into one project thread
