If I had 2 front speakers flat down to 20hz set to large, a home theater reciever, no sub, and a 5.1 movie track with a LFE channel - would the LFE channel redirect to the front? Or would it be discarded? I know some recievers may do things differently, and have a yamaha aventage ax3000, but wondered what most recievers do.
-
-
it is my understanding that when an AVR is set to 'Large' for the front main speakers, the full range unabridged signal is delivered to them. -
Bill is correct. You must also tell the AVR that you have no sub (Important!) .....center or surrounds.
Mains set to large and the AVR will matrix everything into your 2 main speakers.......Including LFE.Dan Madden :TComment
-
Even if you have a center and surrounds and only had your front speakers set to large and hte others set to small it would still route LFE to your 2 mains.Comment
-
Is it possible to route only the LFE to a sub with this processor? I am considering the NHT VT-3 system which has two 10's per side that are make it a full range speaker. I wanted to keep my HSU TN1220HO subs (I have a pair) and use them only for LFE. In going through the set up menus of the RDC7 there... -
I have done my very best trying to find more info on this but couldn't find it anywhere in the forum so here we go;
I have a Denon 2800mkII connected to a 1066 via coax. All speakers are set to LARGE and a REL sub is connected on line to LFE out aswell aswell as the high input is connected... -
Hi,
I've decided to give Philips 963sa a try given its great price at B&H Photo (239-). I've just got it in and I basically cannot seem to be able to set up the sub properly for SACD playback. Every time I set my main speakers to large, it automatically switches sub off in Advanced Bass Managment... -
Hey folks,
Been a long time coming for me to DIY sub and have a need for something rare/good looking. I want a large dual open baffle sub to add to my setup. If not two curved cabinets for UM18s but wanted to build something different before i resort to a build that's been done before.
... -
Fellow members, I just did the software upgrade on my 1066 to version 2.26. I notice that I am not getting any LFE from my sub when playing a CD in 2 channel stereo. I’m pretty sure that I did have it before the upgrade, but not 100% sure. Is there something Im missing? Can somebody help me out?...
Comment