Blown speakers, but not all the way

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • kgveteran
    Senior Member
    • Oct 2005
    • 865

    #1

    Blown speakers, but not all the way

    So this is the story.I run Audessey and forget to check the settings (this is not the first time I've run Audessey).Stupid me.

    My mains and center are set to large and 40hz XO.

    I throw in WOTW and play the dts track and proceed to play it at reference level until my center channel amp (an Outlaw M-200) shuts down.

    I check the main LCR for problems using TrueRta and it looks like I kinda fried the tweeter and kinda fried the woofers in the center speaker !!

    Million dollar question.....the tweeter still works but looks like like the output is diminished quite abit.The woofers still work, but the same thing, the output is quite diminished.I'll do a swap of drivers tomorrow (the main L&R measure fine).Midrange seems about equal to the L&R.

    Second million dollar question. Is there a chance I damaged the XO and not the drivers ?

    BTW the mains I use are three RS WTMW centers.

    :M KG :M
    Here is my LCR "Trio". Way to go guys !
  • kgveteran
    Senior Member
    • Oct 2005
    • 865

    #2
    Swapped out the RS28a tweeter and the response looks good.Well, the tweeter is blown, thats easy.

    Swapped out the woofers and the dip is still there.Seems the drivers are fine but something in the 225's XO is shot.Could I fry a 100microfarad cap ? Would that cause the dip in the drivers response if the cap went bad ?


    Help,help Kg
    Here is my LCR "Trio". Way to go guys !

    Comment

    Related Topics

    Collapse

    • xyrium
      Testing for a blown/damaged woofer?
      by xyrium
      A month or so ago I assembled a sealed two way design. Today, I noticed some buzzing during music playback (sounds like plastic vibrating at the end of a each tone). I'm thinking I may have blown one of the woofers.

      I found this thread, and in post #15, a process for determining a blown...
      27 February 2010, 17:05 Saturday
    • digitalman
      Troubleshooting my Fried Nautilus NHTM1 Center Channel
      by digitalman
      I have a NHTM1 center channel, it was hooked to a B&K reference 7250 Series II amp which has now shorted out and fried for the 3rd time.

      the first time the amp fried and shit down it was connected to this NHTM1, I have always felt the the center never really sounded that good afterwards...
      25 August 2015, 10:16 Tuesday
    • Race Car Driver
      Blown N802 Tweeter..
      by Race Car Driver

      Damn it!
      Ive been hearing this slight crackling coming from my left 802 lately.. off and on... hard to narrow down..

      Well, It started doing it again.. constantly.. and i was really worried it was the mid.. I spun the tweet out and unplugged it.. the noise stopped. (music...
      20 November 2005, 20:17 Sunday
    • tpirovol
      Blown tweeter or bad sound quality?
      by tpirovol
      Hi Everyone,

      I was just wondering if anyone knew of a way to tell if they have a blown speaker. I have a B&W HTM62 and sometimes when I am watching TV or a movie i get almost like a distortion sound from the speaker. For example if I am watching batman dark night the part one...
      19 February 2009, 01:04 Thursday
    • rotel&energy
      Blown left channel (RB-1080)?
      by rotel&energy
      Hey guys,

      This is my first post in a long time, and unfortunately I'm going to open up an old issue - blown left channels on RB-1080s. I've had my 1080 for over 2 years, using the 12 volt trigger, without any problems. Just the other night, I came into the family room and noticed I...
      21 June 2006, 10:58 Wednesday
    • Loading...
    • No more items.
    Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"