Yamaha DSP-A1 Problem

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • Chris H
    Junior Member
    • May 2007
    • 2

    #1

    Yamaha DSP-A1 Problem

    Hi All,

    I am a long term home cinema user (everything worked straight out of the box in 2001) and have just hit my first snag with my DSP-A1, I hope you can point me in the right direction!

    Each time I power up the unit it shuts down after about 3 seconds. There have been no alterations to the setup in the past few months and all was fully operational 24 hours ago. I am connected via the speaker outputs to a Bose Acoustimass 15 speaker configuration. I have stereo sound inputs from a satellite set top box and a Media Centre PC connects via both stereo input jacks and an optical link.

    After reading some of the posts on the site I am considering a re-wire when I return home this evening to eliminate the possibility of a short in the cabling, but thought I would post the issue just in case it can be identified as having another cause.

    thanks for any help you can afford me

    Chris
  • Kevin D
    Ultra Senior Member
    • Oct 2002
    • 4601

    #2
    If it was a speaker wire short, Yamaha's typically tell you that the next time you turn it on with 'CHECK SPK WIRES' on the front. Usually when we have a quick shut off like that it's a problem with the power supply board.

    Kevin D.

    Comment

    • Chris H
      Junior Member
      • May 2007
      • 2

      #3
      Thanks Kevin, looks like it is of to the repair centre with it then!

      Chris

      Comment

      Related Topics

      Collapse

      • adb
        how to use more pseakers with the Bose Acoustimass 10-III for 7.1 with a Rotel reciver?
        by adb
        Hello,

        Does somebody know how to use more (for 7.1 instead of 5.1) Bose Acoustimass 10-III speakers with a Rotel receiver of a processor with a good Rotel amplifier?

        Need your advise.

        regards,

        AdB, Holland
        25 December 2003, 15:30 Thursday
      • kcsun
        centre channel problems
        by kcsun
        My home theatre setup uses 803di as left and right and an HTM2Di as centre. My ongoing issue is that of intelligibility of speech. I do realise that actors do not speak "proper" any more and do not always face directly to the microphone when talking. (this is why animated movies are usually...
        21 February 2016, 09:45 Sunday
      • kcsun
        Centre speaker help
        by kcsun
        Forgive me if this drags on and on and on but..... I think I have the same problem as alot of people, whenever we watch TV or a film we struggle to listen to the dialogue clearly we then turn the volume up to try and improve the speech only to be deafened when the next crash and bang happens. We have...
        11 January 2012, 18:02 Wednesday
      • Nick T
        RSX-1056 - redirect front mains to centre?
        by Nick T
        Hi everyone,
        I'm aware that, with the 1056, you can redirect the front channel amplifiers to
        power center back speakers or speakers in Zone 2 speakers. But if i'm running a 6.1 setup (ie using the 1056 and an RB1070 to power the front mains ), i assume its impossible to redirect one of...
        04 December 2004, 09:12 Saturday
      • markyboy56
        very best mono block for centre
        by markyboy56
        hi

        i want to try this instead
        in addition to my setup above
        i want to add a very good monoblock to the centre speaker to enhance it greatly
        i will be using my marantz as main amp
        then i will use the music fidelity m3i and crown 102
        for the high and low...
        28 January 2018, 23:58 Sunday
      • Loading...
      • No more items.
      Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"