New Kit needed - question

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • stevelee54
    Junior Member
    • Jan 2007
    • 1

    #1

    New Kit needed - question

    Please be gentle as I am both new and not an audiophile
    When I bought my house it had a HT fitted
    Amppro digital video projector (front)
    Soundstream M3 Monobloc
    soundstream C2
    stewart PA1008 amp (for sub woofer I think)

    Q: 1 of the monoblocs has gone kaput and I would prefer to keep the replacement as simple and as cheap as possible so would like suggestions.

    I had a dvd and vhs hooked up 3 forward speakers 2 rear and 1 side sub

    TIA

    Steve
  • David Meek
    Ultra Senior Member
    • Aug 2000
    • 8934

    #2
    Hi Steve, welcome to The Guide. :welcome:

    Have you checked to see if it's just a dead fuse? Or maybe a shorted power cord? I'd try those two steps before anything else. Also, contact Soundstream and see if they have any authorized repair shops in your area.

    If that doesn't fix the issue, and if you are only wanting to replace the one dead monoblock then there is a used Marantz MA-500 on audiogon for $175. Good amp for a good price.

    Hope this helps.
    .

    David - Trigger-happy HTGuide Admin

    Comment

    Related Topics

    Collapse

    • Design4
      Rotel RSP-1069 dead?
      by Design4
      Hey guys,

      I posted this on another forum but had no responses. Hopefully I'll have a little bit more luck here. Basically, I bought a Rotel RSP-1069 a few months ago second hand and for the most part it worked beautifully. However, I was having the infamous handshake issues with the HDMI...
      10 December 2011, 14:48 Saturday
    • Claude D D
      Day of the Dead
      by Claude D D
      For any Zombie flic lovers this gore fest is a must have.Re-mastered and with DD-EX and DTS-ES Discrete sound.

      From Amazon.com
      Chapter three of George Romero's mighty zombie trilogy has big footsteps to follow. Night of the Living Dead was a classic that revitalized a certain corner...
      20 August 2003, 22:43 Wednesday
    • dinnu
      RB-1080 - Help - Now I really have a dead Ch
      by dinnu
      Earlier I thought I had a dead ch but it turned out to be an IC. But now I really have a dead ch. I bought it used a few days ago, after the initial scare with the dead IC, I was able to connect it fine and it was working great for almost two days. This morning I noticed that there was no sound coming...
      26 November 2005, 11:15 Saturday
    • BKSinAZ
      Turns out I was hooking my Yamaha rxv-2095 up as a preamp correctly. They sold me a dead amp!
      by BKSinAZ
      As most of you know, I just bought a RMB-1095 amp today...new in a sealed box. My first Rotel product. When I took it home, I attempted to hook my Yamaha RXV-2095 receiver up as a preamp to the RMB-1095. I thought I was hooking the Yami up incorrectly, but from reading the post it turns out I was doing...
      08 January 2004, 23:43 Thursday
    • ---k---
      Dead Tweeter
      by ---k---
      Is it possible that my less than amateur soldering skills killed one of my tweeters? I have two new Seas D26NC55 tweeters sitting here. I didn't test either prior to attempting to install them.

      The first one is dead. Because the terminals are so small, I attempted to solder some 14ga...
      02 February 2008, 17:25 Saturday
    • Loading...
    • No more items.
    Working...
      Searching...Please wait.
      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

      Please push the back button and reload the previous window.'
      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

      Please push the back button and reload the previous window.'
      An internal error has occurred and the module cannot be displayed.
      There are no results that meet this criteria.
      Search Result for "|||"