I have a panny 900 and am looking for a way to plug in my regular co-ax cable signal into my panny to watch some of the plympics is there a comverter to switch it to s-video. thanks
-
-
Hello Porkie,
Just a quick question. Do you have a cable receiver box?
If so there should be an ouput for s-video on the rear of the cable box?
Keep up posted,
Azeke -
no i just have the co=ax coming out from the wallComment
-
Well then you will require some sort of tuner to identify specific channel frequencies. So no you can not just use an adaptor. You will require a set to box from your service provider or a display with a built in tuner.JasonComment
-
o,k. thanks, i thought i might be able to run it throught v.h.s playerComment
-
Well you could do that, it should have a tuner but the best connection you'll likely get out of that is composite. You can probably get a composite to s-video connector from that but I would imagine your display has a composite input anyhow right?JasonComment
-
i put it through an old vcr i had laying around not the greatest pic but heck it works there is no s-video or composite on vcr just rca jacks... thanks for all your helpComment
-
rca jacks ARE composite connections
JasonComment
-
I'm purchasing a Panasonic plasma with a QAM tuner, so I can view Comcast HDTV without their cursed set-top box fee. The problem: the Panny doesn't have an RF (coax cable) input. The older receiver I have on that system won't pass an HDTV signal. A Google search turned up nothing. There MUST be... -
I am new to the audio hobby. Have about 12k worth of music but nothing of an audio system to speak of yet. So I am working on it. Here are a couple questions about the coax audio cables.
#1. I realize that these are required in order to pass HT or surround information from a CD/DVD... -
Hi All,
I live in a high rise building and it is common to see coax cable being split throughout the building. Just in my unit alone the coax is split 3 ways (two bedrooms and living room). Would using a powered coax splitter improve my picture quality? I guess my true question is,... -
This is the third upgrade I've done. My original cable was just a cheap USB cable I got from who knows where and it worked sounded good and no complaints.
This all going to my Musical Fidelity V-Link 192.
Then I upgraded my usb cable to a Wireworld Ultraviolet cable and... -
I have been using a cheap Coax cable from my DVD player to my Rotel 1066 Processor, I was wondering will I hear any difference using a dearer $150 cable.
Comment