I have my centre channel bi-amped with a 2 channel power amp. I was hoping to use one length of bi-wire cable that I already have, however the positive wires are color coded white and grey there is nothing to distinguish a seperate signal path for the negative. Can I use this cable or am I best to use two seperate cables?
-
-
You would not be able to bi-amp with a "2x4" or "single" bi-wire cable. There is only one connection on the amp side.
Color coding can be verified by the use of a multimeter.Danish -
It is currently bare wire I was hoping to terminate it myself, but if I split the negative cables in half for treble and bass there is no way to identifiy the wires at the other end
Comment
-
:?:
Any one have any experience with the Zu Cable speaker wires & interconnects on any Rotel products? Please do share. I currently have:
Zu Cable Wax - Biwire
Zu Cable Oxyfuel Interconnects
:?:
I will be purchasing the Rotel RSP-1066 / RMB-1075 combo shortly... -
I am going to puchase a RB 1070 or 1080 to run the mains from my RSX 1056. I have the 1056 about 15 meters from the mains - so I can run 15 m of biwire speaker cable from the amp or put the amp close to the speakers - say 2-3m and run long rca's from the 1056 to the amp. Which would be the best option... -
I have a rotel 1057 receiver and a krell amp. Should I just biwire w/ the krell or should I bi amp with the receiver and the krell amp? -
Hi Guys ,
I need some advice as to what is best .
I want to add another amp to my RSX1065 to run some B&W604S3's
Do I :
1.get RB 1080 and biwire the 604's(200w per speaker)
2.get RMB1075 and biamp the 604's (2x120w per speaker and leaves one channel spare... -
I have had a set of Nautilus 805's that I bought new about a year ago, my buddy got a set of 805S's and thought we would do a side by side comparsion of the two one day. We had everything hooked up to a Classe CA-201 amp, HK AVR520 pre-amp, Denon DVD-1920 dvd-player, and Rotel RCC-1055 CD changer all...
Comment