The home theater is finally complete, and consists of:
Room = 22x15x8.5, 2x6 construction, soundboard + 5/8" DW + R25 insulation all around; 2 rows of 4 Coaster black leather seats (2nd row is on a 10" riser)
Front stage = 15'x3'x3', loaded with 4 Ascendant Audio AV18's (IB) and equipment rack (IB = 95,000 liters)
Panasonic AE700U projector, 133" DIY screen (16:9)
Denon 4806
Crest CA-18
Behringer BFD
Denon 3910
Dish 942
Klipsch RF-7's (7-channel)
So my question is, what would you use for a power conditioner? The CA-18 is on its own, dedicated 30A circuit. The A/V equipment is on 2 dedicated 20A circuits (the receiver/dvd/behringer/dish are on one circuit; the projector is on a second). I've got no noise in the system (that I can detect, although I am running my coax from the dish through a second grounding block and a 3GHz isolator as well), but my power is a bit irregular...
I've got a Furman PM-Pro Series II 20A filter that I'm running right now, but I've got a line on a PowerVar ABC 1200-11 for $75. Is it worth it? Will using it be overkill? Should I be using something else?
I'd love to UPS my projector, but I didn't know how to do it, since it's ceiling mounted and pulling power from a ceiling mounted switch... any suggestions?
Thanks in advance.
Room = 22x15x8.5, 2x6 construction, soundboard + 5/8" DW + R25 insulation all around; 2 rows of 4 Coaster black leather seats (2nd row is on a 10" riser)
Front stage = 15'x3'x3', loaded with 4 Ascendant Audio AV18's (IB) and equipment rack (IB = 95,000 liters)
Panasonic AE700U projector, 133" DIY screen (16:9)
Denon 4806
Crest CA-18
Behringer BFD
Denon 3910
Dish 942
Klipsch RF-7's (7-channel)
So my question is, what would you use for a power conditioner? The CA-18 is on its own, dedicated 30A circuit. The A/V equipment is on 2 dedicated 20A circuits (the receiver/dvd/behringer/dish are on one circuit; the projector is on a second). I've got no noise in the system (that I can detect, although I am running my coax from the dish through a second grounding block and a 3GHz isolator as well), but my power is a bit irregular...
I've got a Furman PM-Pro Series II 20A filter that I'm running right now, but I've got a line on a PowerVar ABC 1200-11 for $75. Is it worth it? Will using it be overkill? Should I be using something else?
I'd love to UPS my projector, but I didn't know how to do it, since it's ceiling mounted and pulling power from a ceiling mounted switch... any suggestions?
Thanks in advance.
Comment