-
BG's whitepapers for these drivers mention PDR reducing the effective radiating area as frequency increases but don't specify how the area varies. The Neo3 PDR paper talks about the area narrowing to a slit which is apparently parallel to the long axis of the driver, suggesting the long axis should... -
I can't think of a better name, so this will have to do for a while. Then again, the last speakers I built were the Monoliths - these ones could be the "Miniliths".
OK, so here are the main objectives for this project.
1) Build an (almost) full range bookshelf... -
Hi all,
this is my first post here, so I want to give thanks to you all for all valuable information you share here.
I have never tried before any DIY project, but now I'm planning to fund my first serious HiFi project and I'm thinking about making my own speakers based on... -
Hi all!
I'm trying to think of a good application for the Neo3. As many of you know, I've tried measuring the thing, and the results were a disaster. I know this tweeter can sound very good, but I can't really make it work to my liking. I suppose I'm crossing it over too low (2 KHz).... -
Hi!
I've been thinking a bit about the Neo drivers lately.
I've yet to be happy with a design with the Neo3 (I've done 3 by now). But this last weekend I went to a friends' house, who now owns one of my Neo3 designs. He was crazy about it - and I must agree, after all these...
Comment