I just ordered the drywall so this is my last chance for any changes. Please let me know if I am missing anything.
The room is 18.5 x 12.5 x (10ft ceilings but will have to drop 1 ft because of pipes, frame & sheetrock) with a storage closet and a double window. I haven't decided on a projector yet (4805 or Z2) so I am sure of the exact location of the ceiling mount. I would like atleast a 98" to 105" screen. My front row (old movie theater seats) will only be approx 9' and then my back row will be at 15' (6' of riser- will that be enough room for theater seating?).
I have insulated the walls and the ceiling joists with R19 insulation and then a layer of roofing material. The ceiling was then framed and another layer of r13 insulation on top.
- Should I put another layer of R13 insulation in the ceiling frame?
I have pre-wired for a 8.1 setup. I also have RG6 runs in each corner of the room for a sub (most likely front left corner). My AV rack (dedicated 20 amp outlet) is built in the wall and I have conduit pipes running from the AV rack to where the projector will be located in the ceiling for wiring. I also have a dedicated 20amp outlet for the projector in the ceiling (I also put one on the back wall just in case).
I plan on building a riser for the back row so I have a 12/2 romex coming out where the riser will be for future rope lights. I also wired RCA/s-video from the riser position to the projector location. I ran 2 12ga cl3 speaker wires from the AV rack to the riser for Bass shakers.
I will have 4 wall scones and 5 can lights wired to remote controlled dimmers (on a dedicated 20 amp outlet).
One more addition- IR repeater system. I am ordering a Xantech 291 kit.
What am I missing?
THANKS IN ADVANCE FOR THE INPUT
Unfortuntely my breaker box is in the HT room.
Where it all began-
The room is 18.5 x 12.5 x (10ft ceilings but will have to drop 1 ft because of pipes, frame & sheetrock) with a storage closet and a double window. I haven't decided on a projector yet (4805 or Z2) so I am sure of the exact location of the ceiling mount. I would like atleast a 98" to 105" screen. My front row (old movie theater seats) will only be approx 9' and then my back row will be at 15' (6' of riser- will that be enough room for theater seating?).
I have insulated the walls and the ceiling joists with R19 insulation and then a layer of roofing material. The ceiling was then framed and another layer of r13 insulation on top.
- Should I put another layer of R13 insulation in the ceiling frame?
I have pre-wired for a 8.1 setup. I also have RG6 runs in each corner of the room for a sub (most likely front left corner). My AV rack (dedicated 20 amp outlet) is built in the wall and I have conduit pipes running from the AV rack to where the projector will be located in the ceiling for wiring. I also have a dedicated 20amp outlet for the projector in the ceiling (I also put one on the back wall just in case).
I plan on building a riser for the back row so I have a 12/2 romex coming out where the riser will be for future rope lights. I also wired RCA/s-video from the riser position to the projector location. I ran 2 12ga cl3 speaker wires from the AV rack to the riser for Bass shakers.
I will have 4 wall scones and 5 can lights wired to remote controlled dimmers (on a dedicated 20 amp outlet).
One more addition- IR repeater system. I am ordering a Xantech 291 kit.
What am I missing?
THANKS IN ADVANCE FOR THE INPUT
Unfortuntely my breaker box is in the HT room.
Where it all began-
Comment