I dropped my Pronto onto a table. The drop was only about 6" but it was enough to make the fragile Pronto stop working.
I think I've figured out what happened. One of the metal contacts for the negative side of the battery has fallen to the interior of my Pronto. I assume the impact of the fall knocked the contact out of position. Now I need to take the Pronto apart to position the contact correctly.
I notice two very small allen bolts on the underside of the Pronto. Is this all that's holding the Pronto housing together? Is there anything else I should watch for when taking the Pronto apart?
Any tips at all would be appreciated.
-Sili
I think I've figured out what happened. One of the metal contacts for the negative side of the battery has fallen to the interior of my Pronto. I assume the impact of the fall knocked the contact out of position. Now I need to take the Pronto apart to position the contact correctly.
I notice two very small allen bolts on the underside of the Pronto. Is this all that's holding the Pronto housing together? Is there anything else I should watch for when taking the Pronto apart?
Any tips at all would be appreciated.
-Sili
Comment