InFocus X1 Power cord length?

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • SpOoNmAn
    Senior Member
    • Sep 2003
    • 518
    #1

    InFocus X1 Power cord length?

    I'm hoping someone in here has one and can measure the power cord for me. I'll be getting one soon enough and want to know where I'm running the cord..Thanks!

    -Aaron-




    Life is short, Play it LOUD!

    Theatre Photo Album (A work in Progress)
    GameTracker -My List-
    Life is short, Play it LOUD!
    Tags: None
      • Bottom
    • Claude D D
      Senior Member
      • Jan 2003
      • 465
      #2
      The powercord for the X1 is about 10ft.You can buy a IEC connector from parts express and some 14gauge 3strand(Hot,neutal,ground)extention cord cable and a good quality 3prong plug and make a cord any length that is better quality than the original(the original is 18 gauge) for pretty cheap.Mine is 22 ft and cost less than $40.
        • Bottom

        Comment

        • Lex
          Ultra Senior Member
          • Apr 2001
          • 27460
          #3
          Yeah, and if you do buy from Parts Express, be sure to use the click through ad at the top!

          I sound like a broken record sometimes. :LOL:

          Lex
          Doug
          "I'm out there Jerry, and I'm loving every minute of it!" - Kramer
            • Bottom

            Comment

            • SpOoNmAn
              Senior Member
              • Sep 2003
              • 518
              #4
              LOL, thank you gentlemen




              Life is short, Play it LOUD!

              Theatre Photo Album (A work in Progress)
              GameTracker -My List-
              Life is short, Play it LOUD!
                • Bottom

                Comment

                Previous template Next

                Related Topics

                Collapse
                • ht_addict
                  Tripp Lite LCR240 input needed as power line conditioner
                  by ht_addict
                  Just curious if anyone could give some feedback on the Tripp Lite LCR2400. It seems to do the same as the Monster AVS2000 but at a fraction of the cost.($375CDN) definitely has the power output to handle a hungry HT. Here's a link.




                  DESCRIPTION

                  ...
                  18 October 2003, 09:32 Saturday
                • clm811
                  Premium-grade power cord
                  by clm811
                  Upgraded power cord{AWG16x3C Shielded w/IEC plug} sold in bulk, (identical to that supplied by both Denon and Parasound with their high-end components) It is an audible upgrade to the standard "computer" cords supplied with most components. Marinco and Wattgate plugs are available through...
                  07 November 2002, 19:12 Thursday
                • ti33er
                  My new Infocus 4805!
                  by ti33er
                  Well well well, the UK has finally graced us Brits with the much talked about Infocus 4805!

                  I had a demo yesterday afternoon, and without a shadow of a doubt, handed over my plastic wallet within 30 minutes – we did a side-by-side comparison with the Infocus 5700, and I tell you what,...
                  01 July 2004, 09:46 Thursday
                • Ron Reda
                  1066 Power cord replacement
                  by Ron Reda
                  Based on some discussion in another thread, I went ahead and ordered a VH Audio Flavor 3 power cord to replace the stock cord that came with the 1066 pre/pro. However, when it arrived today, I noticed that the cord had a three-prong female receptacle with a three-prong male receptacle versus a two-prong...
                  26 August 2003, 18:43 Tuesday
                • BWLover
                  Power Cord Question
                  by BWLover
                  So I got an RLC-1040 and the power cord that came with it was maybe 2 feet :M (on a good day). So I switched it with the power cord on my RB-1080. They were both 14AWG cords but the 1080's was 6 feet (long enough for my RLC-1040). Now the 2 foot cord is to short to be used on my amp. So now the cord...
                  17 August 2009, 04:36 Monday
                • Loading...
                • No more items.
                Working...
                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"