Basic question on distances

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • greenjudas
    Member
    • Mar 2005
    • 85

    #1

    Basic question on distances

    Hi all,still looking at buying a projector.Max screen size I can fit in is 90 inch and so my question is.Can I place pro on shelf at a distance of about 17ft and still get an image to fit 90 inch screen or would I have to ceiling mount at a shorter distance ?Could some pro's do this or would most be able to do this?
  • setite
    Junior Member
    • Sep 2005
    • 28

    #2
    well using the projection calculator at projectorcentral.com you can throw 130" with 1.3x zoom with a sanyo plv-z3. so yes i'm willing to say that you will have no problem throwing a 90 inch picture at 17 feet, possibly with no zoom at all. i would advise you to go to www.projectorcentral.com and find your projector and do the calculations... the gain of your screen matters some to as far as getting optimal picture that is neither too bright or not bright enough. though i am no expert whatsoever i'm sure you could do this yourself... unless your a complete butterfingers

    Comment

    • BlazeMaster
      Senior Member
      • May 2004
      • 644

      #3
      how far are you sitting away from the screen? If you goal is to be as far away from the projector itself as possible, there is a few projectors out there that has a long throw. The Panasonic AE700 comes into mind. But, if you are sitting about 17 feet away, I'd go with a screen at least 100" if not even 120". But different strokes for different folks right?

      Comment

      • greenjudas
        Member
        • Mar 2005
        • 85

        #4
        I would be sitting about 13ft away.It would be a bit easier by having pro on back wall shelf as opposed to ceiling mount as far as power cord etc. Unfortunately 90 inch is max at this stage because we have an entertainment unit which stands about 5 ft tall,and this houses tv,audio and av gear.Because we have 10 ft ceilings I can throw the image above the ent unit and not have the wife on my back about getting rid of ent unit.Obviously getting rid of ent unit and having 100 -130 inch screen would be the ideal,but as most of you are probably aware,its not that easy.

        Comment

        Related Topics

        Collapse

        • wettou
          Jvc Rs20
          by wettou
          Fantastic review from Art Feierman :T ;x(

          Thank you

          www.projectorreviews.com

          JVC DLA-RS20 Projector Review

          A detailed review of the JVC DLA-RS20 1080p home theater projector.
          This review has just been posted,...
          06 February 2009, 00:20 Friday
        • Lex
          KE32TS2 32 inch plasma display
          by Lex
          Well, I quitely added this TV to supplement my front projection since I saw real quickly that I was going to crank a lot of hours on my PJ in a hurry. It's an HDTV monitor, the following applies: (Extracted from Plasma Depot since it was actually better than Sony's writeup.) I won't address each feature...
          12 October 2003, 21:33 Sunday
        • ToddT
          4805 Screen Installation
          by ToddT
          I'm attempting to setup a 16x9 80"x45 DIY projector screen.
          I have the projector installed on the ceiling.

          I am having a problem getting a consistent horizontal size from the SP4805!

          I started by projecting a blank (blue) image onto the wall and then used the...
          24 June 2005, 00:43 Friday
        • Andrew Pratt
          Sony black screen
          by Andrew Pratt
          Anyone have more info on this new screen from Sony?

          Here's all I could find on it so far.

          Sony introduces black projector screen for well-lit up areas
          Posted by Sean Byrne on 24 June 2004 - 00:49

          When Thomas Edison first invented the projector over...
          09 September 2004, 13:45 Thursday
        • rhodiel
          Screen options
          by rhodiel
          Hello,

          I am going to get the Sanyo PLV-2Z. My room is 23x14x8.5. I plan to mount this PJ approx 15' with maximum zoom to fit a 60x106 screen.

          I need to options to what screen i need.

          Features needed:

          Micro-pref
          electric
          tensioned...
          23 March 2004, 20:12 Tuesday
        • Loading...
        • No more items.
        Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"