rsx1056 / dynaudio 52's

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rick c
    Senior Member
    • Aug 2004
    • 430
    #1

    rsx1056 / dynaudio 52's

    I have decide to probably upgrade my speakers to the dynaudio 52's.I have researched and visited various forums and the overall concensus is that these skrs are very good.I did listen to them a while back but with diferrent electronics from what i have now.My dilema is that i'll have to get these spks little by little ,Mains,center(122c) & surrounds(42's).Will my rsx1056 be enough for these speakers w/o an additional amp.My use is 70%ht 30%music.I will not have the funds for the amp if i get the spkrs.Maybe next year i will but not now.Would the rotel be suffice or would i definatley need an amp.If so then i'll have to re-evaluate my speaker options.thanks
    P.S>I'll be going used for all spkrs.
    Tags: None
      • Bottom
    • rick c
      Senior Member
      • Aug 2004
      • 430
      #2
      I may be comitting real soon and would appreciate the help before i comitt.thanks
        • Bottom

        Comment

        • myki
          Junior Member
          • Oct 2004
          • 19
          #3
          rick c,

          I don't have experience with the rsx-1056 but I've recently purchased an all-Dynaudio Audience home theater setup (52, 42, 42c).

          I've used it for 2 months with a Marantz SR-7200 and I was happy with it. It was a lot better (music and home theater) than with my previous all B&W 601 setup.

          I recently got an RMB-1075 power amp and it is much better now. Dynamics are just unbelievable.

          The Dyns are 4 ohms but I don't think they are hard to drive compared with other 4 ohm speakers. My SR7200 gets warm but never hot enough that I couldn't touch the receiver.

          Knowing Rotel's quality and power, I'm confident that it will handle your Dyns nicely. I borrowed an RA-02 integrated amp and connected it to the Audience 52 and it sounded great. Could be better, but already great.

          I hope that helps.
            • Bottom

            Comment

            • lvhung
              Senior Member
              • Jun 2005
              • 301
              #4
              RSX 1056 soudn find with Dyna audince but counld not bring out the best of
              Dyna
              Sould you eveveer listen to JMlab Chorus
                • Bottom

                Comment

                Previous template Next

                Related Topics

                Collapse
                • xyzsurf
                  First Post(long): Ideas, Questions, and the verge of Insanity!
                  by xyzsurf
                  Let me first say Hi! My name is Mike and I'm sure I'll be hanging around here quite often now as I get sucked even further into this monstrous money pit. After I got my first entry level system about 7 months ago, I've been getting deeper and deeper in. Now after having had some Dynaudio 52s at the...
                  05 July 2005, 11:18 Tuesday
                • rick c
                  rotel rsx1056 w/4 ohm speakers;misconception
                  by rick c
                  I always thought that the rsx1056 should not be used with 4ohm speakers.Atleast that's what rotel told me a while back when i was inquiring about dynaudio speakers,so i ended up with B&W 603s3's/lcr600(really liked them anyway).Well i have upgraded my speakers to a System Audio setup(sa1750/sa720av/sa505's)these...
                  03 May 2007, 21:41 Thursday
                • jbreezy5
                  Speaker Battle: KEF XQ5 vs. Dynaudio Audience 82
                  by jbreezy5
                  This is a review/comparison of the KEF XQ5's with Dynaudio Audience 82's:

                  I purchased a pair of KEF XQ5's used yesterday for $1,000 from Theatrical Concepts Inc. on Craig's List. They seem to be fully broken in; they lack the typical signs to indicate otherwise. Initially I was not sure...
                  18 April 2010, 00:01 Sunday
                • rick c
                  friend bought rsx1056 now the spkrs
                  by rick c
                  A friend of mine just got into HT and bought a rotel rsx1056.He now wants to get a pair of speakers .He prefers floorstanding and in "cherry".He wants to buy via audiogon and has seen some spkrs he likes but knows nothing about.He asked me to ask you what you guys think of his choices.He has...
                  10 October 2004, 19:34 Sunday
                • calli43
                  wich front speakers with rotel RSx1056
                  by calli43
                  HI there,

                  I am looking for new frontspeakers for Rotel RSX1056.
                  Up to 2500$ a pair. The speakers I have in mind are
                  B&W CM4 1400 euro
                  B&W 704 2200 euro
                  Dynaudio audience 72 about 1800 euro

                  Which off this speakers do you recommmend and...
                  17 January 2005, 10:27 Monday
                • Loading...
                • No more items.
                Working...
                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"