break-in period?

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • elite1
    Junior Member
    • May 2004
    • 3

    #1

    break-in period?

    hi all, i recently picked up an rmb1095 and i absolutely love it. it sits in an enclosed rack with about 2'' of space on the sides, open in front and back, but less than an 1'' of space on top. does it need more space than this to keep from overheating? i'm using fairly efficient speakers (def tech bp2000tl). also what is the average length of the break in period?

    thanks
  • Aussie Geoff
    Super Senior Member
    • Oct 2003
    • 1914

    #2
    Hi,

    Re the more space - this will depend on how good the front and back ventilation is (your should never close the RMB-1095 in totally). Bottom line - run it for a hour or so at normal levels then touch the heat sinks on the side (not the front they are for show). If they are warm - fine - but if they are hot - you need more ventilation - try a small PC fan running on low speed.

    Re the break in period - most people find the amp gets significantly better after 15-20 hours use - some have a sudden improvement after a longer period (1 to 4 weeks). Leaving it on helps.

    Geoff

    Comment

    • Kevin D
      Ultra Senior Member
      • Oct 2002
      • 4601

      #3
      Originally posted by Aussie Geoff
      touch the heat sinks on the side (not the front they are for show).
      Geoff
      The front heatsink is for the center channel. Most workout during movies is the center channel, thus the bigger heatsink in front.

      Kevin D.

      Comment

      Related Topics

      Collapse

      • akhter
        CD Player requires breakin?
        by akhter
        Or am I just imagining things (quite possible).

        Last week I got an Arcam CD73T after comparing it with the Arcam CD192/Linn Genki/Naim CD5x, and found the entry-level arcam to be the best value by a long-shot. All the other players were similarly priced ($1700-1900), and the Arcam gave...
        18 August 2005, 09:34 Thursday
      • weijst
        Room for ventilation...
        by weijst
        I got this quote from another thread (thanx Aussie Geoff ). Here 2 inches at the top is defined as "good ventilation" (for the RSX-1056).

        It made me wonder: how much room for ventilation do you guys use / recommend for your (pre)amps? I remember my manuals stating to use...
        15 November 2004, 10:05 Monday
      • tanwn
        Rotel 1090 heatsink question
        by tanwn
        i bought a used rotel 1090 and would like to know whether this is normal. The rear of the top plate heatsink facing rear of amp is hotter than the front part of the heatsink facing towards the front. Is this normal? After a while should the top be just warm to the touch or hot.
        30 August 2006, 04:31 Wednesday
      • drsiebling
        Rotel Ventilation
        by drsiebling
        Hello everybody!

        I'm about to make a purchase on a new media stand that will house my new plamsa TV as well as my Rotel and home theatre gear. I have, however, run into a problem. Both the Rotel 1056 and the Pioneer Elite Media Box recommend at least 4 inches of clearance around the...
        05 March 2006, 16:13 Sunday
      • Minardi2
        Ventilation for CA-3200
        by Minardi2
        I have a CA-3200 at home for an in-home demo for a few days to compare it to my six channel Krell Showcase (using the Classe to drive the fronts for comparison puposes). The manual says the amp needs 6" clearance on top and 3" on the sides. I have a Salamander Triple 20 (three columns with...
        30 December 2007, 21:13 Sunday
      • Loading...
      • No more items.
      Working...
        Searching...Please wait.
        An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

        Please push the back button and reload the previous window.'
        An unexpected error was returned: 'Your submission could not be processed because the token has expired.

        Please push the back button and reload the previous window.'
        An internal error has occurred and the module cannot be displayed.
        There are no results that meet this criteria.
        Search Result for "|||"