1066 won't turn on after upgrade
Collapse
This topic is closed.
X
X
-
HELP!!! I just tried to upgrade the firmware on my 1066 from V1.37 to V1.45. I wasn't successful since I didn't even see the screens that was in the Rotel PDF. Now when I try to turn it on, it won't even come on! I have followed the pinout diagram supplied by Rotel and even tested the connections with a multimeter. However when I go into hyperterminal, I don't get any response on the screen. What am I doing wrong? Is it suppossed to be a powered serial port? I have used hyperterminal before to program access points before with no problem. Can someone please help me???- Bottom
-
Phillip,
I had he same problem. If you do not get the correct hyperterminal screens then you can count on there being something wrong with the pins. I found I had mine reversed. When I got them the right way around the upgrade worked and the 1066 was back. I am confident that if you correct the cable it will work.
John- Bottom
Comment
-
Your setting in hyperterminal match those in Rotels's PDF?
RSP 1066 Properties menu, Connect to tab
-19200 Bits per second
-8 Data bits
-None Parity
-1 Stop bit
-None Flow control
RSP 1066 Properties menu, Settings tab,
-Emulation to VT100
ASCII setup
-Append line feeds
-Wrap lines
You put both dip switches on the back of the RSP 1066 in the Update/write/program/debug mode? ( both switches should both be switched the same way, not just one switch one way and one the other)
after that you did this (not in any other order)
1.connected PC to RSP 1066
2.start hyperterminal with the RSP 1066 settings
3.hit the power button on the RSP 1066
Are you sure you did all that?- Bottom
Comment
-
- Bottom
Comment
-
Okay guys, finally got the update to go...Whew! It was a problem with the cable. If you look at the pinouts on the Rotel website, it shows that pins 3 & 5 should be together. Finally read Andrews cable design where he says that 4 & 6 should be together. Tried that and the upgarde worked flawlessly. Thanks for your help guys, I really appreciate it!
P.S. Does this upgrade improve the sound quality of 2 channel music?- Bottom
Comment
-
- Bottom
Comment
Comment