I'm trying to put the finishing touches on integrating my new RSX 1055 into my HT system and I can't figure something out. How do I select input sources using the remote control? When I push 'tuner' or VCR, the LCD of the remote shows my selection, but, nothing happens at the receiver. If I select it at the unit itself, it works fine. What am I overlooking? Thanks, Bob.
-
Rotel has a FAQ available here that may answer some of your questions. We've added several points of our own as well below.
1. How do I know what firmware is installed on my processor?
Answer: Simply press and hold the mute button on the remote and it will be displayd on the LCD...15 April 2003, 14:08 Tuesday -
G'Day you mob,
Let me first say, being new to Rotel gear and new to this forum, what a great help it is to have forums like this with people being happy to share their experiences and give advise to us mere mortals. Living on one of Australias last frontiers (Darwin), the forums are invaluable... -
I returned home from a 3 day trip and find that my new 1055 (v 2.24) is very slow to accept IR commands. i.e., the volume will not ramp when I hold down the volume UP/DOWN button. To change Video sources I often have to press a button 4 or 5 times. Control from the front panel of the receiver is fine.... -
I've owned this receiver for about 1 1/2 years now, from day one the remote control/ ir strength has been really weak. I originally set the powering up of the unit with the "direct" mode, because of the POS remote response.
I recently upgraded to a MX-500 universal remote. After... -
I have a RXS-1056 with it's oem RR-1050 remote. I have programmed my inputs and the 1056's LED displays my selections: DVD, DIRECTV, SAT, IPOD, PHONO.
On the remote, selecting V1 displays DVD on the remote's LED, which is correct, but I have no idea how this came to be.
However,...
Comment