Hello,
Firstly, is this a good idea? Secondly, how would I connect them up as I don't have much expertise here.
Firstly, is this a good idea? Secondly, how would I connect them up as I don't have much expertise here.
-
-
Connect the "pre out" jacks on the RA-04 to the inputs on the RB-1070.
Disconnect your speakers from the RA-04 and connect them to the RB-1070.
Set the speaker switch to "off" on the RA-04.
The RB-1070 has more power and is (most likely) a higher quality amp than the one in the RA-04, so your system should sound better this way. -
Kevin P,
Thank you for the clear answer.Comment
-
Hello all,
Have been lurking through various HT forums for some time but new to Club Rotel. I have learnt much and have improved my system greatly with the advice I've learnt. However, I am looking to upgrade within a limited budget, and a limited physical space and wish some advice.... -
Dear All Expertise out there...
I have recently purchased a used RMB 1075 and old RSP 966 processor, how do these both sound in terms of Music then HT usage. I know 966 is only Pro Logic and DTS/5.1 and has no other DSP’s other other new formats etc. but my question is, are the dynamics...16 October 2006, 04:14 Monday -
Hi all,
Can anyone tell me the difference soundwise between the RB1070 and the RB1080?
At nearly double the price, does the RB1080 sound any better than the RB1070? (RB1080 = $1600 V's RB1070 =$900) Thats recommended full retail prices in Australia.
... -
I'm also new to the forum and must say..."Rotel or bust"...
Ivhung is motivating me to ask this question. I am currently driving Boston VR2 (bi-wired @ 4ohm) with RC1070/RB1070 pair with Boston PV500 sub using the secong line-level outs of the pre-amp. It KILLS!!
I want to get... -
my question is i have at the moment i have 2 dali ikon 6v2 fronts dali ikon vokal centre
2 dali zensor 7 as rears
2 dali zensor 1 as additional rears
4 dali c1 atmos modules
i also have the crown 1002 amp as well
sony x800 4k player
blue jeans speaker cables...
Comment