Hi to all,
someone can help me to find out wich firmware I have on my RSP 1066?
I can't see nothing in osd menu... :M :M :M
someone can help me to find out wich firmware I have on my RSP 1066?
I can't see nothing in osd menu... :M :M :M
-
AUDIO
Amplifiers:
Pre Home Theatre: Rotel RSP-1066
Power Amp. Home Theatre: Rotel RB-985 MKII
Stereo Int. Amp.: Analogue Puccini SE (No Remote version)
Speakers:
Front: B&W DM602 S2
Central: B&W CC6 S2
Surr. Back: B&W DM110 (1986)
Sub: B&W ASW608
VIDEO
Tv: Samsung LE 32R72B
Processor: DVDO iscan HD plus
HDMI 1.3 switch 5.1 -
Hold the mute button for 5 seconds.
The latest software is either 1.54 or 2.30. There is a hardware difference between v1 and v2, so if your software is 1.xx you must not attempt to upgrade to 2.30.
You can get the software from here http://bwgroup-support.com/software.html, the cable to connect the 1066 should be in the box the 1066 came in, if you lost it you'll have to contact Rotel and ask them for a new one.
The cable connects to COM1, an old port not found on new computers, so you'll either need an old computer or an USB to COM1 adapter.Last edited by hurin; 13 July 2011, 12:02 Wednesday.
-
I currently own a RSP-1066 and RMB-1075 connected to a PlayStation 3 and I am planning to replace the RSP-1066 with a RSP-1069 in order to listen to lossless soundtracks.
In order to avoid the HDMI video problems I read bout in this forum, I was thinking about buying an Octava HDMI splitter and... -
If just upgraded my rsp-1066 to the rsp-1098 and i am so happy i can't believe the improvement especially in normal stereo listening (cd's)
I also upgraded all my cables with nordost blue heaven.
So now i am broke but happy
.....i can't stop listening
best regards,... -
I have had my 1098 for about a week now, but because of my family (3 young kids) and my job I have only had about 4 hours of real setup and listening time, so this is not meant of be an indepth review. But before I get started on the 1098 I would like you know a little about where I came from so you... -
Rotel has a FAQ available here that may answer some of your questions. We've added several points of our own as well below.
1. How do I know what firmware is installed on my processor?
Answer: Simply press and hold the mute button on the remote and it will be displayd on the LCD...15 April 2003, 14:08 Tuesday -
undefinedundefinedI am looking to upgrade my processing at home. I own a AC-3 RSP-970 by Rotel and have enjoyed it for years. I have a Toshiba DVD the decodes DD/DTS. I purchased many years ago at the beginning of DD home theatre.
I am going to spend less that $1000.00 but would love...
Comment