Guess what Rotel sent me this morning!
Note that the HD units indicates the newer models running the modified chipsets. If your machine is using these different chipsets please do not flash your firmware unless you've obtained the correct file directly from Rotel.
RSP 1066 Software Updates Release Notes
V1.2 to V1.32
- Added Dolby Digital EX feature.
- Added an IR code for Zone 2 control from the main zone.
- Added discrete IR codes for TUNE and PRESET modes.
V1.32 to V1.37
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed a bug that did not allow front panel button operation of the PLII / 3 Stereo button when playing a Dolby Digital 2Ch source.
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.
V1.37 to V1.41
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.
- Removed a small buzz in surround speakers when in HDCD mode and with Multi-Input engaged.
V1.41 to V1.43
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.
V1.43 to V1.44
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V1.44 to V1.45
- Balanced sound levels on DSP Music modes
-
V1.45 to V1.47
- Added subwoofer output to dts Neo:6 mode when using large front speakers.
V1.47 to V1.48
display now displays "Multi" when multi channel inputs are in use.
Rec out on the display is now replaced with the volume level.
the sub can now be turned off for different devices to assist with bass management.
Starting units V2.20
- Hardware change new software not backwards compatible
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V2.20 to V2.21
- Balanced sound levels on DSP Music modes
V2.21 to V2.23
- Added subwoofer output to dts Neo:6 mode when using large front speakers.
V2.23 to V2.24
display now displays "Multi" when multi channel inputs are in use.
Rec out on the display is now replaced with the volume level.
the sub can now be turned off for different devices to assist with bass management.
RSX 1055 Software Updates Release Notes
V1.37
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed a bug that did not allow front panel button operation of the PLII / 3 Stereo button when playing a Dolby Digital 2Ch source.
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.
V1.37 to V1.41
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.
V1.41 to V1.42
- Changed some characters on the German OSD.
V1.41 to V1.43
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.
V1.43 to V1.44
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V1.44 to V1.45
- Balanced sound levels on DSP Music modes
-
V1.45 to V1.46
- Corrected bug in Amplifier redirection
V1.46 to V1.47
- Added subwoofer output to dts Neo:6 mode when using large front speakers.
V1.47 to V1.48
display now displays "Multi" when multi channel inputs are in use.
Rec out on the display is now replaced with the volume level.
the sub can now be turned off for different devices to assist with bass management.
Starting units V2.20
- Hardware change new software not backwards compatible
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V2.20 to V2.21
- Balanced sound levels on DSP Music modes
- V2.21 to V2.22
V2.21 to V2.23
- Added subwoofer output to dts Neo:6 mode when using large front speakers.
V2.23 to V2.24
display now displays "Multi" when multi channel inputs are in use.
Rec out on the display is now replaced with the volume level.
the sub can now be turned off for different devices to assist with bass management.
RSX 1065 Software Update Release Notes
V1.1 to V1.2
- Added dts Neo:6 feature.
- Added Pro Logic II Music Panorama, Dimension, and Center Width settings.
- Added RS232 protocols for AM, FM, Pro Logic II, Neo:6 and OSD.
- Stopped the 10 numeric keys on the remote from switching inputs to TUNER when pressed.
V1.2 to V1.3
- Added 6.1/7.1 Channel output from Pro Logic II (with EPROM change.)
- Added delay times for CB speaker(s) in PLII.
- Boosted test tone levels by 10dB.
- Added discrete IR codes for Pro Logic II Cinema, PLII Music, 5Ch Stereo, 7Ch Stereo, and 2Ch Stereo.
- Boosted subwoofer output by +10dB.
- Added subwoofer level adjustment for the Multi-Input.
- Added IR codes for FM Mono and Memory.
V1.3 to V1.4
- Stopped the band and CH up/down keys on the remote from switching inputs to TUNER when pressed.
V1.4 to V1.42
- Added an IR code for Zone 2 control from the main zone.
- Added discrete IR codes for TUNE and PRESET modes.
V1.42 to V2.12 (Requires EPROM Change)
- Added Dolby Digital EX feature.
V2.12 to V2.16
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.
V2.16 to V2.18
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.
- Removed a small buzz from rear speakers when in HDCD mode and Multi-Input was engaged.
V2.18 to V2.19
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V2.19 to V2.20
- Balanced sound levels on DSP Music.
V2.20 to V2.21
- Added subwoofer output to dts Neo:6 mode when using large front speakers.
Starting units V 1.49
V1.49
- Hardware change new software not backwards compatible
- Added Dolby Digital EX feature.
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.
V1.49 to V1.51
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.
V1.51 to V1.52
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V1.52 to V1.53
- Balanced sound levels on DSP Music modes.
V1.53 to V1.54
- Added subwoofer output to dts Neo:6 mode when using large front speakers
Note that the HD units indicates the newer models running the modified chipsets. If your machine is using these different chipsets please do not flash your firmware unless you've obtained the correct file directly from Rotel.
RSP 1066 Software Updates Release Notes
V1.2 to V1.32
- Added Dolby Digital EX feature.
- Added an IR code for Zone 2 control from the main zone.
- Added discrete IR codes for TUNE and PRESET modes.
V1.32 to V1.37
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed a bug that did not allow front panel button operation of the PLII / 3 Stereo button when playing a Dolby Digital 2Ch source.
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.
V1.37 to V1.41
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.
- Removed a small buzz in surround speakers when in HDCD mode and with Multi-Input engaged.
V1.41 to V1.43
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.
V1.43 to V1.44
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V1.44 to V1.45
- Balanced sound levels on DSP Music modes
-
V1.45 to V1.47
- Added subwoofer output to dts Neo:6 mode when using large front speakers.
V1.47 to V1.48
display now displays "Multi" when multi channel inputs are in use.
Rec out on the display is now replaced with the volume level.
the sub can now be turned off for different devices to assist with bass management.
Starting units V2.20
- Hardware change new software not backwards compatible
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V2.20 to V2.21
- Balanced sound levels on DSP Music modes
V2.21 to V2.23
- Added subwoofer output to dts Neo:6 mode when using large front speakers.
V2.23 to V2.24
display now displays "Multi" when multi channel inputs are in use.
Rec out on the display is now replaced with the volume level.
the sub can now be turned off for different devices to assist with bass management.
RSX 1055 Software Updates Release Notes
V1.37
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed a bug that did not allow front panel button operation of the PLII / 3 Stereo button when playing a Dolby Digital 2Ch source.
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.
V1.37 to V1.41
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.
V1.41 to V1.42
- Changed some characters on the German OSD.
V1.41 to V1.43
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.
V1.43 to V1.44
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V1.44 to V1.45
- Balanced sound levels on DSP Music modes
-
V1.45 to V1.46
- Corrected bug in Amplifier redirection
V1.46 to V1.47
- Added subwoofer output to dts Neo:6 mode when using large front speakers.
V1.47 to V1.48
display now displays "Multi" when multi channel inputs are in use.
Rec out on the display is now replaced with the volume level.
the sub can now be turned off for different devices to assist with bass management.
Starting units V2.20
- Hardware change new software not backwards compatible
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V2.20 to V2.21
- Balanced sound levels on DSP Music modes
- V2.21 to V2.22
V2.21 to V2.23
- Added subwoofer output to dts Neo:6 mode when using large front speakers.
V2.23 to V2.24
display now displays "Multi" when multi channel inputs are in use.
Rec out on the display is now replaced with the volume level.
the sub can now be turned off for different devices to assist with bass management.
RSX 1065 Software Update Release Notes
V1.1 to V1.2
- Added dts Neo:6 feature.
- Added Pro Logic II Music Panorama, Dimension, and Center Width settings.
- Added RS232 protocols for AM, FM, Pro Logic II, Neo:6 and OSD.
- Stopped the 10 numeric keys on the remote from switching inputs to TUNER when pressed.
V1.2 to V1.3
- Added 6.1/7.1 Channel output from Pro Logic II (with EPROM change.)
- Added delay times for CB speaker(s) in PLII.
- Boosted test tone levels by 10dB.
- Added discrete IR codes for Pro Logic II Cinema, PLII Music, 5Ch Stereo, 7Ch Stereo, and 2Ch Stereo.
- Boosted subwoofer output by +10dB.
- Added subwoofer level adjustment for the Multi-Input.
- Added IR codes for FM Mono and Memory.
V1.3 to V1.4
- Stopped the band and CH up/down keys on the remote from switching inputs to TUNER when pressed.
V1.4 to V1.42
- Added an IR code for Zone 2 control from the main zone.
- Added discrete IR codes for TUNE and PRESET modes.
V1.42 to V2.12 (Requires EPROM Change)
- Added Dolby Digital EX feature.
V2.12 to V2.16
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.
V2.16 to V2.18
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.
- Removed a small buzz from rear speakers when in HDCD mode and Multi-Input was engaged.
V2.18 to V2.19
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V2.19 to V2.20
- Balanced sound levels on DSP Music.
V2.20 to V2.21
- Added subwoofer output to dts Neo:6 mode when using large front speakers.
Starting units V 1.49
V1.49
- Hardware change new software not backwards compatible
- Added Dolby Digital EX feature.
- Changed the default mode for Dolby Digital 2Ch sources to Dolby Pro Logic II
- Fixed conflicting displays on CB level settings between Front display and On-Screen Display to show correct levels for CB speaker(s).
- Fixed the output of Pro Logic II from reverting to 2Ch when playing a DD 2CH source, CB speakers were set to None and delay set to 10ms.
V1.49 to V1.51
- Changed the OSD background color setting to Black for both Composite and S-Video Monitor out.
- Fixed a change in the sound image when unit received a discrete IR ON command in Pro Logic II with Center speaker set to OFF.
V1.51 to V1.52
- Adjusted the writing time to EEPROM IC from 4.5 usec to 10 usec to improve memory backup.
V1.52 to V1.53
- Balanced sound levels on DSP Music modes.
V1.53 to V1.54
- Added subwoofer output to dts Neo:6 mode when using large front speakers
Comment