RSX 1067 Zone 2 & speaker cross-over settings

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Robo1067
    Junior Member
    • Jan 2006
    • 21
    #1

    RSX 1067 Zone 2 & speaker cross-over settings

    Greetings once again.
    I have just been wondering about the signal being sent to my 'zone 2' speakers.

    Currently I am using a separate power amp for the 7 channels in the lounge theater and have the speakers set to small and the cross-overs set at say 80hz. I am obviously using a powered sub-woofer as well. :B
    I believe that these settings are passed on through the pre-outs to the power amp.

    How-ever I have the 1067 main speakers assigned as internally powered zone 2 speakers. (ie the 1067 internal main speaker amps drive them.)

    So, how does the cross-over setting affect these zone 2 speakers, are they getting the full range signal or are they getting the altered cross-over settings and only getting above the 80Hz?

    I could find no reference to this in the manual.

    Thanks in advance,
    Rob.
    Tags: None
      • Bottom
    • Kevin D
      Ultra Senior Member
      • Oct 2002
      • 4601
      #2
      Zone 2 is full range from the analog inputs. No crossovers or digital conversion at all.

      Kevin D.
        • Bottom

        Comment

        • Robo1067
          Junior Member
          • Jan 2006
          • 21
          #3
          Thanks again Kevin.
            • Bottom

            Comment

            Previous template Next

            Related Topics

            Collapse
            • selfilm
              Advice and support for my Rotel RSX 1067 Srnd Snd Rec., please help!
              by selfilm
              Hello,
              I am new to this forum. I am an audiophile with some restrictions to my location - I live in Brooklyn so space is limited, hence the need for smaller Quad Bookshelf speakers and the need to use a Sunfire Subwoofer even though I normally never use Subs. That being said here's where things...
              04 October 2016, 07:55 Tuesday
            • lars
              1050-E,1067,1080 Muffled Sound, Low Volume
              by lars
              Hello All,

              I haven't been very happy with the sound from my setup, so as a last ditch effort (because I just didn't want to believe the problem is my 1067), I tried connecting a 500 Euro Yamaha receiver and, rather unfortnately, it sounded considerably better than my considerably more...
              06 May 2007, 09:10 Sunday
            • methril
              RSX-1067 Zone Channels as Sub Amp for Gallo Ref3's?
              by methril
              I'm having a tough time finding a quality crossover to filter the full range line-level signal from my receiver's pre-outs prior to running them through a separate 2-channel amp (NAD C370) to power the 2nd set of subwoofer voice coils on my Gallo Reference 3's. Guess I'll just have to wait for the Gallo...
              06 July 2005, 01:29 Wednesday
            • RockShow01
              rsx-1067 zone 2 and digital signals
              by RockShow01
              hi all:

              i understand that my rsx-1067 will not pass a digital signal to zone 2. i am currently using an optical connection from a series three tivo box and am not getting sound passed to zone 2 (sq in zone 1 is amazing!!!), but i want to know if i can get sound passed to zone 2 by connecting...
              08 September 2008, 11:48 Monday
            • gstellenberg
              Subwoofer settings with RSX-1067
              by gstellenberg
              Stumbled across this forum a couple of weeks ago after upgrading from a Denon 3802 to an RSX-1067. Thanks for creating such a fabulous resource on Rotel equipment. I've read through many of the past threads concerning the 1067 and subs but still have some questions.

              I have the RSX-1067,...
              06 March 2005, 17:31 Sunday
            • Loading...
            • No more items.
            Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"