Audio Loss

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • rarcha
    Junior Member
    • Jun 2008
    • 4

    #1

    Audio Loss

    Hi All

    Has any one ever lost audio on there RSX 1067. On my 2nd receiver, and still loses audio when changing channels, or on standby, once repowered the next day it takes about 20 - 30min, for audio, and thats recycling the receiver. I'm completely lost. I've tried it all, from cables, tech support, repairs at rotel. Eprom flash works, but once the receiver is unpluged or power is lost, I lose audio.

    Hope someone can help
    Thanks Rich :M
  • PewterTA
    Super Senior Member
    • Nov 2004
    • 2900

    #2
    Something sounds out of wack...and the fact that you said the eprom flash works for a little while would make me think something in that might be causing the problem. When you sent it to rotel, what did they replace/fix/find??
    Digital Audio makes me Happy.
    -Dan

    Comment

    • rarcha
      Junior Member
      • Jun 2008
      • 4

      #3
      On the 1st unit, they replaced the digital board, but after four repairs ( 1 digital board and 3 eprom flashes and software upgrades) they replaced it with a refurb. I feel the same way , that there is another factor, but 2 receivers with almost identicle problems. I've had different sat boxes, cables, used no power filter, etc. I was able to speak with rotel today, my local sales rep/audio specialist is going to take a look at it in home, to determine, weather he can see the problem and repair, or send a tech out for possible repair or replacement. Keeping my fingers crossed. It,s been 1 year to long. Thankyou for the quick responce.

      Rich

      Comment

      • rarcha
        Junior Member
        • Jun 2008
        • 4

        #4
        Well, I finally received the a replacment unit, they tested the replacement for 5 days, also had my dealer set the unit up for testing, all is ok, got it home, set it up all is well. I guess 3rd time is a charm ;x(

        Comment

        • Mig17
          Senior Member
          • Jan 2008
          • 169

          #5
          Ballance design Concept is all that means
          Rotel is a shameful company

          Comment

          • rarcha
            Junior Member
            • Jun 2008
            • 4

            #6
            Replacing my RSX 1067

            HI All

            Right know my 1067 is peforming great, but if any one had a chance to replace the unit for separats, which would any one prefer, my dealer is willing to give me 1200 for the 1067 as a trade in, I dont know the blu book value. but that seems to be the asking price. Any comments would be well appreciated. My mains are B & W CDM 9NT center CDM CNT rears CDM SNT sub AWS 2500 CDM.

            Thanks Rich
            Last edited by rarcha; 19 July 2008, 18:19 Saturday.

            Comment

            Related Topics

            Collapse

            • wywong
              RSP 1068 eprom upgrade Problem
              by wywong
              I am having a hard time getting the latest eprom upgrade done using the Rotel flash up software. I download and unzip the eprom file from the Rotel web site, install the flash up program and use romupdate4.bin file, it keep getting me an error "device not response, check comm. port". I called...
              25 February 2005, 16:12 Friday
            • lcajiga
              Upgraded EPROM and 2.11...now 1098 don't startup
              by lcajiga
              Hi all, I upgraded the EPROM with the flash program and then installed the v2.11 following all the instructions very carefully. After putting back the DIP switches to OFF and turning ON the 1098, the power blue light turns on but the TFT screen does nothing. I try to turn it ON with the remote with...
              03 March 2004, 00:05 Wednesday
            • SaNdOkAn
              Eprom upgrade 1098 not by software
              by SaNdOkAn
              Hi Folks,

              I was thinking off upgradin my 1098 with the latest firmware but i read that some peeps had trouble with the eprom upgrade so i called the distributor over here in the Netherlands and asked him about warranty when the shit hits the fan........

              Guess what....they...
              29 March 2004, 16:39 Monday
            • ghost7
              Eprom/parts for RSP-1098
              by ghost7
              Hey
              I bought a broke RSP 1098 in may and had sent it to a authorised service shop her ein Norway in the beginning of june. After a LONG time there the service techinicion ordred a eprom from the Norwegian Rotel dealer. that was in july, 27th og july to be more excact he has not recieved any parts...
              15 November 2005, 06:34 Tuesday
            • Blazar
              RSP-1098 Fix for EPROM initialization failure Windows XP/Pocket PC users
              by Blazar
              I was not able to use the EPROM update program despite my com ports working fine due to a conflict with Microsoft Activesync software used for Pocket PC's. The EPROM program gives the error message "failure to initialize com port".

              the fix:
              1. ctrl-alt-del
              2....
              22 June 2004, 13:57 Tuesday
            • Loading...
            • No more items.
            Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"