rotel rb 1090

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • k.petrocheilos
    Junior Member
    • Jan 2008
    • 2
    #1

    rotel rb 1090

    I face a problem with my Rotel RB 1090. The amp seems that has no power because power led as long as protection leds are not working. I am thinking that the problem is with the fuse on the main power supply. In case somebody has any info regarding the replacement of the main power supply fuse I would really appreciate to share it with me.

    Rgds
    Kostas
    Tags: None
      • Bottom
    • miner
      Senior Member
      • Mar 2005
      • 900
      #2
      I suggest talking to Rotel - I assume you are in Greece? The Rotel web site will give you you nearest distributor. For US I have found them tobe very helpful.
        • Bottom

        Comment

        • zmanbands
          Senior Member
          • May 2007
          • 151
          #3
          Unplug, open up and look.

          You should be able to see the fuses and if one or more are blown.
            • Bottom

            Comment

            • k.petrocheilos
              Junior Member
              • Jan 2008
              • 2
              #4
              I opened the cover however I cound not find the power supply PCB card. I suppose that it is on the bottom of the amp.
              I send yesterday on 17/1/08 my RB 1090 for repair to Rotel.
              Last edited by k.petrocheilos; 18 January 2008, 11:15 Friday.
                • Bottom

                Comment

                Previous template Next

                Related Topics

                Collapse
                • J.R
                  RDV - 1060 power supply board problem
                  by J.R
                  Hello everybody!

                  My rdv 1060 suddenly stopped working this morning, it was on the stand by, not turned on, and as i wanted to turn it on ,just saw that the blue stand by led wasnt on...i have pushed the switch off and then back on and there was an explosion sound from the inside. As im...
                  05 August 2016, 14:39 Friday
                • shep
                  CP 700 power supply dead? (blinking blue light)
                  by shep
                  I started up my stereo and the pre-amp (CP 700) didn't power up. Looked at the external power supply and it had a blinking blue light on front. Checked all connections and they looked good. Tried shutting down and restarting. Same result. Seems like it is dead (fuse is still good). Any ideas? My local...
                  29 August 2010, 14:50 Sunday
                • nikos
                  Has anyone had their Power Supply changed in Rotel Gear?
                  by nikos
                  Hi everybody,

                  I've been reading quite a few posts and love this forum already. Lots of wisdom to go around.

                  I currently live in the USA, but have plans to relocate in the next 2 years to Europe. My concern of purchasing a Rotel Amp and or Pre-Pro is put in limbo because...
                  04 December 2005, 10:24 Sunday
                • begood
                  HELP!! SSP-300 power supply failed (I think)
                  by begood
                  Last week, my SSP-300 started to emit a high pitch sound and the will not power up. I unplugged it for a while to see if it would reset, but no luck. I removed to cover and determined the high pitch sounds is coming from a AC/DC power supply (the only part that is not made by Classe). I found the...
                  04 June 2017, 07:39 Sunday
                • ligonk
                  Power Supply issue for small portable system - question!
                  by ligonk
                  First off, hi HTGuid community! The interaction in this forum is unprecedented in it's friendliness and willing assistance, so I have come out of lurk mode to pick your brains.


                  I am building a small portable system for my father based off of the B3S full range driver design...
                  09 May 2014, 12:19 Friday
                • Loading...
                • No more items.
                Working...
                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"