Stacking Components

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • redwings99
    Junior Member
    • Jan 2007
    • 8

    #1

    Stacking Components

    Hi.

    Saw a bit of discussion on this but not sure if it was the same components. Apoligize if it's a repeat.

    Anyway, is it acceptable to stack an RCD-1072 on top of a 1068 pre?

    Thx.
  • jayhawk75
    Member
    • Apr 2006
    • 98

    #2
    i have 1072 4" and wood separation above a 1067 and am very worried about the heat situation. so i guess the question is how warm your 1068 is getting always better to get separation if possible.

    Comment

    • wheelz7
      Junior Member
      • Nov 2005
      • 15

      #3
      my 1068 gets very warm and i dont stack it ,but if i did i would put the 1068 on top and the 1072 underneath.

      Comment

      • Ted
        Senior Member
        • May 2006
        • 219

        #4
        :agree:

        I think you are better off to place the 1068 on the 1072 if you have to stack the two together, otherwise the 1068 may not be too happy. :M

        Hope the helps...
        Ted

        "I've gone to this high school for seven and a half years - I'm no dummy." - Better Off Dead opcorn:

        Comment

        • voxy
          Senior Member
          • Jan 2005
          • 113

          #5
          Ted is right...

          Comment

          • chinets
            Senior Member
            • Jun 2005
            • 855

            #6
            I believe 1068 is heavier than the 1072 ,as the 1068 is a pre and the 1072 a CD player, therefore, I would put the 1072 over the 1068 IMHO!! If there is too much heat, then I would NOT stack them, but if you MUST stack them, then 1072 over the 1068 ,and get 2 nice quiet Fans like I have to cool them off.
            My 2 cents,
            Cheers

            Comment

            • redwings99
              Junior Member
              • Jan 2007
              • 8

              #7
              What kind of fans do you recommend?

              Comment

              • chinets
                Senior Member
                • Jun 2005
                • 855

                #8
                Computer fans, or silent fans that I bough in the U.K. that run at 220 V and I run them on 110 V ,so there is absolutely NO sound whatsover, because I down regulate the Voltage!!
                Cheers1

                Comment

                • mike c
                  Senior Member
                  • Dec 2005
                  • 307

                  #9
                  Originally posted by chinets
                  Computer fans, or silent fans that I bough in the U.K. that run at 220 V and I run them on 110 V ,so there is absolutely NO sound whatsover, because I down regulate the Voltage!!
                  Cheers1

                  is that really safe for the 220v fan? or will it shorten its life?

                  Comment

                  • chinets
                    Senior Member
                    • Jun 2005
                    • 855

                    #10
                    Yes, it is safe to run a 220V fan at 110V ,because it has lower revolution ,so the life span will be longer ,as you are running it at half it's required juice, and it gives you a very silent sound too..Trust me on this one. By the way computer fans etc,.. are quite cheap, and your player will need that if it gets over heated. You can afford to kill 100 fans, but one player or equipment that gtes busted due to heat will destroy your pocket, unless you are still under guaranty by the manufacurer, and then you will have to wait till it is fixed. A fan can go belly up and replace it within 24 hours at cheapo $$. Now does that make sense to you?
                    Cheers

                    Comment

                    Related Topics

                    Collapse

                    • hired goon
                      Interconnects for Rotel RSP-1068 / RMB-1075 / RCD-1072
                      by hired goon
                      G'day,

                      I'm looking for reasonably-priced interconnects for my new Rotel RSP-1068 pre/pro, RMB-1075 amplifier, and RCD-1072 cd player. As an example of "reasonable", I'm thinking under AUD$100 (or about US$60). For example, QED Qunex 2 seems like a reasonably priced interconnect...
                      20 September 2004, 01:08 Monday
                    • Karma
                      The "Pile" or How to Stack and Not Get Stuck
                      by Karma
                      HI All,
                      Ordinarily I would not recommend stacking equipment. I can't tell you how many times I have lectured my customers against such practices. I have strong opinions against stacking.

                      That said, my 6 month old bedroom HT system has stacked equipment and it works very well. The...
                      27 April 2006, 07:56 Thursday
                    • BlazeMaster
                      any harm in stacking rotel amps?
                      by BlazeMaster
                      Is there any harm in stacking 2 rotel amps on top of each other? I'm thinking about getting the 1080 and already have the 1075. Due to rack space limits I will be forced to stack them on top of each other. They are both the same weight, with the 1075 a little taller of a chasis, is there any potential...
                      26 February 2007, 02:33 Monday
                    • Nolan B
                      Stacking Pre and Pro
                      by Nolan B
                      Does anyone stack their 1068 right on top of their 1075? Would it be safe if I did this?

                      I would never have the volume cranked all the way up.
                      22 December 2005, 14:10 Thursday
                    • hired goon
                      RSP-1068 questions
                      by hired goon
                      G'day,

                      After a long saga trying out an RSP-1068, then an RSP-1066, I finally settled on the RSP-1068 yesterday. I think (hope!) I've made the right choice.

                      Anyway, I've got a couple of questions, which I trust someone here can help answer.

                      (1) I've got an...
                      18 September 2004, 17:15 Saturday
                    • Loading...
                    • No more items.
                    Working...
                      Searching...Please wait.
                      An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                      Please push the back button and reload the previous window.'
                      An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                      Please push the back button and reload the previous window.'
                      An internal error has occurred and the module cannot be displayed.
                      There are no results that meet this criteria.
                      Search Result for "|||"