Rmb1095 Rating
hi guys i know that the rmb1095 is rated at 200w/channel in 8ohms & 330w/channel in 4ohms but does anyone know what the rating is in 6ohms?
-
-
Given the above data, mathematical computations would put it at 265w at 6ohmsOriginally posted by sergiok
-
Wow Rickyo,
Impressive...Now for a difficult one..How about the rating at .05 ohms!!! :rofl:
OOOOOOOHHHHHHHHMMMMMMMMMM!!! OOOOHHHHHHHHMM! Indian doing spiritual thinking here!!!! :W
Have fun with this one!! :E
Cheers!
Comment
-
458.375wOriginally posted by chinetsWow Rickyo,
Impressive...Now for a difficult one..How about the rating at .05 ohms!!! :rofl:
OOOOOOOHHHHHHHHMMMMMMMMMM!!! OOOOHHHHHHHHMM! Indian doing spiritual thinking here!!!! :W
Have fun with this one!! :E
Cheers!
ops: :??
Comment
-
thanks rickyo. :TComment
-
Originally posted by rickyo458.375wops: :??
Actually 0w . You'll send it into to protection mode..
Kevin D.Comment
-
yup, I did go into protection mode :lol:Originally posted by Kevin DActually 0w . You'll send it into to protection mode..
Kevin D.Comment
-
I've just assembled a system, consisting of using a denon 3805, running preouts to an rb1090 and a rmb1095 ( unbalanced).
I am only getting weak sound out of the main right and left front but nothing out of the other five speakers which are connected to the Rmb1095.
I read... -
I am a club Rotel member and am set on the RSP 1066. I am have ben leaning towards the RMB1095 as well, however, I just ran into a B&K 7250 which is brand new and from an authroized dealer. It retails for $2,499 new, but they are willing to go $1,420 for the unit (which includes a full warranty...31 January 2003, 19:32 Friday -
Hello everyone. This is my first post. Has anyone has any experience matching the RMB 1095 with the PMC LB1 or any other PMC range before. The LB1 is rated at 87db and 4ohms. They are studio monitor speakers with excellent detail and bass.
Also, how would you describe the tonal characteristics... -
I've a RMB1095 amp that pops through the speakers (all) during both power up/off. I've tried cleaning all earth pins on the cables and are at a loss.
I've visited the Rotel internet site looking for an email address to email Rotel to see if they cant shed some light, but they dont seem... -
Hi Guys,
i just purchased a Rotel rmb1095 amp & connected it to my Yamaha rxv3000 av receiver.when i increase the volume its like the rotel not working.are my preout signals from my Yamaha compatible with the rotel? could someone advise me thanks serg.
Comment