Sub with bypass

[shades]

Here is my dilema.

I want to listen to music with bypass enabled. The thing is i don't no how to hook it up or if i got the right equipment or if it's possible.

Now if someone would be so kind as to school me on this process it would be much appreciated.

If this is possible, will the setup still work with 5.1. I don't want to get up everytime i want to listen to music vs 5.1 to switch the wires back and forth.

My setup is:
B&W 804S series LR
HTM4 center
601 S3 surrounds
paradigm PW 2100
RSX 1056
RCD1072
bryston 3bst-for 2 channel

Thx for any help

Peter

[Kevin D]

1) Unplug the cables coming out of the front outputs of the 1056 going to the Bryston inputs.

2) Unplug the subout cable going from the 1056 to the 2100

3) Plug new cables into the front outputs of the 1056 and run them to the stereo inputs on the 2100

4) Plug the cables you removed in #1 into the outputs of the 2100

5) In the 1056's menu set the front speakers to LARGE and the subwoofer to NO.

This changes the subwoofer management duty from the 1056 to the 2100. The front speakers will be fixed at 80hz, but you should be able to set the sub crossover to a good level to blend.

This give's a subwoofer with EVERY mode, including bypass.

Kevin D.

[shades]

kevin, your the best bro.

thx
peter