RSX-1056 keeps going on standby

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • VikingP
    Junior Member
    • Feb 2005
    • 28
    #1

    RSX-1056 keeps going on standby

    Hi,

    I am having a problem with my RSX-1056, and was wondering if anyone ever had a similar problem. I searched in other threads, but couldn't find anything like my situation.
    When I turned on the RSX-1056 from standby today, it turned on for about 1 second, and then went back to standby mode. I tried it a few times after that, and still the same thing. I tried turning it off from the switch on the back, or completely unplugging it for a few minutes, but it still does the same thing when I try turning it on.
    Nothing has changed from the last time it was working, and there are no shorts in any of the speaker cables. The dealer doesn't seem to know what it can be, so I am hoping that someone might have an idea, since sending it out for repair would really be a pain (not to mention being without it for some time :cry: ) .

    Any ideas would be greatly appreciated.

    Thanks

    Paul
    Tags: None
      • Bottom
    • srb
      Senior Member
      • Oct 2004
      • 311
      #2
      Maybe one of your speakers itself has a short?

      Have you tried powering it up with no speakers connected at all?
        • Bottom

        Comment

        • VikingP
          Junior Member
          • Feb 2005
          • 28
          #3
          Yup, I unplugged all the speakers from the receiver, except for the fronts which are on separate amplifiers, but it kept doing the same thing.
          It's as if it enters a sort of protection mode and sets itself to standby, but I have no idea why. Everything seems in order, and there is nothing abnormal about the OSD (no error message or anything of the sort) for that one second that it's on.

          Paul
            • Bottom

            Comment

            • Azeke
              Super Senior Member
              • Mar 2003
              • 2123
              #4
              Perhaps it's temperature related. Is your receiver in a well ventilated area?

              If you feel adventurous, you can open the case and check for blown fuses.

              Peace and blessings,

              Azeke
                • Bottom

                Comment

                • VikingP
                  Junior Member
                  • Feb 2005
                  • 28
                  #5
                  The receiver has about 3 inches of air on top of it, which would seem like enough.
                  As for a fuse, I don't think it's a fuse probelm, since it does come on for a second. Would openning the case void my warranty with Rotel?

                  Thanks.

                  Paul
                    • Bottom

                    Comment

                    • Azeke
                      Super Senior Member
                      • Mar 2003
                      • 2123
                      #6
                      Paul,

                      I don't believe so, but before you open it, I would contact Rotel tech support (1-978-664-3820), and explain the problem, perhaps the can resolve the issue over the phone.

                      Peace and blessings,

                      Azeke
                        • Bottom

                        Comment

                        • VikingP
                          Junior Member
                          • Feb 2005
                          • 28
                          #7
                          Hi Azeke,

                          Thank you for their phone number and for your help. I will call them tomorrow and see what they say.
                          Hopefully it's nothing major.

                          Paul
                            • Bottom

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • steven_braith
                              RSX-1055 (F/W 2.30) keeps switching to standby
                              by steven_braith
                              Three weeks ago I upgraded (!?!) my firmware from 2.26 to 2.30 and since that day my RSX 1055 keeps on switching itself into standby.

                              I have noticed that it tends to happen within the first 30 minutes of switching the unit on - so I'm thinking maybe something to do with it not having...
                              23 March 2008, 20:50 Sunday
                            • rangeles
                              RSP 1098 will not go off standby? Frantic!
                              by rangeles
                              Hello All,

                              I am troubled that after I came home, and come to turn on my 1098 it will not turn on. The blue light is on, but I can not get it to turn on- using both remote 1050 and the front panel button. I tried turning off the main switch on the back and back on again. I noticed a...
                              30 July 2008, 19:55 Wednesday
                            • johnvb
                              RSX 1055 locked out on standby power
                              by johnvb
                              I've owned this receiver for about 1 1/2 years now, from day one the remote control/ ir strength has been really weak. I originally set the powering up of the unit with the "direct" mode, because of the POS remote response.

                              I recently upgraded to a MX-500 universal remote. After...
                              07 December 2004, 10:25 Tuesday
                            • cxc21
                              RA-1062 keeps blowing fuses
                              by cxc21
                              My Rotel RA-1062 stopped working in standby, nothing playing, just was dead in the morning.

                              It keeps blowing the fuses F603 and F604 when I switch it on. Those next to the toroidal transfomer. They blow immediately no speaker or input attached.

                              Any chance to get the service...
                              31 December 2011, 16:18 Saturday
                            • DNO
                              RSP-1069 Standby only, No FL display, no output
                              by DNO
                              This unit has been in service for quite a few years, but recently I've been turning it off via the rocker switch on the rear panel. Just yesterday, only the blue stanby light on the front lights up. The soft on/off switch will no longer turn on the display, nor do anything else. Nor does it respond...
                              09 August 2012, 00:11 Thursday
                            • Loading...
                            • No more items.
                            Working...
                              Searching...Please wait.
                              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                              Please push the back button and reload the previous window.'
                              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                              Please push the back button and reload the previous window.'
                              An internal error has occurred and the module cannot be displayed.
                              There are no results that meet this criteria.
                              Search Result for "|||"