stacking

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • camel
    Junior Member
    • Oct 2006
    • 2

    #1

    stacking

    Would you stack (from bottom to top) 1098 1075 1092

    with the 1098 being the deeper has to be at the bottom..

    front and back are open . on the sides there is about 1 inch space
  • mjb
    Super Senior Member
    • Mar 2005
    • 1485

    #2
    Probably not, the 1098 runs quite hot and should really have some space above it. I used to have a 1098 on top of a 1075 with no problems though.
    - Mike

    Main System:
    B&W 802D, HTM2D, SCMS
    Classé SSP-800, CA-2200, CA-5100

    Comment

    • camel
      Junior Member
      • Oct 2006
      • 2

      #3
      thanks a lot.. how did you manage to put a 1098 on top of a 1075.. 1098 is deeper and the its foot would probably be left out at the back..

      Comment

      • mjb
        Super Senior Member
        • Mar 2005
        • 1485

        #4
        It fits, the 1098 does hang over slightly at the rear - but the feet fit.
        - Mike

        Main System:
        B&W 802D, HTM2D, SCMS
        Classé SSP-800, CA-2200, CA-5100

        Comment

        Related Topics

        Collapse

        • len73
          Replacing RSP-1098+RMB-1075 -> RSX-1560 ?
          by len73
          Hello,

          After hours or reading and relfexions, I would like to have your opinion about this possible upgrade :

          I am currently running a RSP-1098+RMB-1075. Everything works perfectly.
          But wanting to upgrade the Pre to get HDMI as well as new Dolby/DTS HD format, I...
          05 September 2009, 02:27 Saturday
        • hoekie
          Rsp 1098 / rmb 1075
          by hoekie
          Hi guys

          im back again after a long time

          have some strange problems with my set

          rsp 1098 / rmb 1075 / rb 1070 (2x) with the b&w cdm 7nts cdmcnt and 4 times the cdm snt

          when i watch movies i hear a strange noise bij talking the s or t...
          11 March 2010, 13:26 Thursday
        • BlazeMaster
          any harm in stacking rotel amps?
          by BlazeMaster
          Is there any harm in stacking 2 rotel amps on top of each other? I'm thinking about getting the 1080 and already have the 1075. Due to rack space limits I will be forced to stack them on top of each other. They are both the same weight, with the 1075 a little taller of a chasis, is there any potential...
          26 February 2007, 02:33 Monday
        • sridhar mahadevan
          Problems with 1098 and 1075
          by sridhar mahadevan
          I just purchased a 1098 processor along with the 1075 amp,
          on the basis of quite a few stellar reviews.

          So far, I must say I am disappointed by the performance of
          these units. Perhaps I have a defective 1098, but let me describe the
          problems I'm having, and perhaps...
          20 February 2004, 23:21 Friday
        • Glen1
          1098 ground loop
          by Glen1
          Hi Guys,
          Got a bit of a ground loop buzz with 1098 and 1075. It is a constant volume and only goes away at mute, 0 volume or 1098 off, it's not very loud but there all the same. Volume of buzz does not change at all.
          Got two dvd's plugged in via digitial co-axial, cd and set top box...
          12 August 2005, 21:42 Friday
        • Loading...
        • No more items.
        Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"