1068 upgrade Help!

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • wlowney
    Junior Member
    • Jan 2004
    • 23

    1068 upgrade Help!

    HELP Anybody

    I'm stuck at download binary file duriring my upgrade.
    I'm trying to do PLIIx upgrade. Up to the part instruction # 16 where it says "select look in to find software file downloaded from the website"

    My PC can't open or download .bin file. I am running windows XP.

    Any suggestions on how to get the software from the website onto my PC

    Don't want to shut it down at this point. I probably already erased exiting software.
  • Azeke
    Super Senior Member
    • Mar 2003
    • 2123

    #2
    Go to the aforemetioned URL and save the downloaded bin file to your PC. Once you have completed the download point to the file path where you have downloaded the software (I usually put mine on the desktop, so it's easy to find), don't try to do if from the server. http://rotel.com/support/techups/techup-H21.htm

    Hope this helps,

    Azeke

    Comment

    • wlowney
      Junior Member
      • Jan 2004
      • 23

      #3
      Azeke

      Did what you suggested. Software update is updating now however instructions say 3 lines of periods and upgrade should be complete. I am now up to 5 lines now and still going. Is this a problem?

      Comment

      • Andrew Pratt
        Moderator Emeritus
        • Aug 2000
        • 16507

        #4
        Probably not if your hyperterminal window isn't maximized




        Comment

        • wlowney
          Junior Member
          • Jan 2004
          • 23

          #5
          Thanks

          Finally stopped Rom Checksum is 0xa243
          download ok

          Confirm if checksum is right. How do I know if its right?
          Sorry for all the questions 1st time doing an upgrade

          Comment

          • Azeke
            Super Senior Member
            • Mar 2003
            • 2123

            #6
            That certainly doesn't seem correct, but if the upgrade is completed, as Andrew stated, the Hyperterminal window was not maximized.

            Now, return the two dip switches to the off position, replace the cover, and the 1068 should power up normally.

            Hold down the mute button for appoximately 4-5 seconds, it should reveal the new software version.

            Hopefully, everthing is fine, now it's time to relax and enjoy the sounds. You may want to recalibrate your speakers, I seemed to have minor adjustments after the upgrade.

            Regards,


            Azeke

            Comment

            • wlowney
              Junior Member
              • Jan 2004
              • 23

              #7
              Azeke/Andrew

              Thanks for your help. Update was successful. Everything is running great!

              Comment

              • Azeke
                Super Senior Member
                • Mar 2003
                • 2123

                #8
                You're welcome.

                Enjoy,

                Azeke

                Comment

                Working...
                😀
                😂
                🥰
                😘
                🤢
                😎
                😞
                😡
                👍
                👎
                Searching...Please wait.
                An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                Please push the back button and reload the previous window.'
                An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                Please push the back button and reload the previous window.'
                An internal error has occurred and the module cannot be displayed.
                There are no results that meet this criteria.
                Search Result for "|||"