RB1050 and 16 Ohm speakers

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Matt Zielinski
    Junior Member
    • Feb 2004
    • 11
    #1

    RB1050 and 16 Ohm speakers

    Can I run 16 ohm speakers on RB1050.

    THX for responses




    Matt
    Room 11x22x7.5
    Rotel-1098/1075/1050
    Sony-KF50WE610/DVP-S7700
    ExpressVu Dish and HD cable Box
    B&W speakers: CDM 9NT; HTM7; CDM SNT
    Matt
    Room 11x22x7.5
    Rotel-1098/1075/1050
    Sony-KF50WE610/DVP-S7700
    ExpressVu Dish and HD cable Box
    B&W speakers: CDM 9NT; HTM7; CDM SNT
    Tags: None
      • Bottom
    • Kevin D
      Ultra Senior Member
      • Oct 2002
      • 4601
      #2
      Higher ohms aren't a problem, you just have to make sure it has enough power to run it. You could generally cut the power in half and that's what you will get at 16ohms.. So effectively you would have about 35watts per channel.


      Kevin D.
        • Bottom

        Comment

        • Matt Zielinski
          Junior Member
          • Feb 2004
          • 11
          #3
          Thank you Kevin




          Matt
          Room 11x22x7.5
          Rotel-1098/1075/1050
          Sony-KF50WE610/DVP-S7700
          ExpressVu Dish and HD cable Box
          B&W speakers: CDM 9NT; HTM7; CDM SNT
          Matt
          Room 11x22x7.5
          Rotel-1098/1075/1050
          Sony-KF50WE610/DVP-S7700
          ExpressVu Dish and HD cable Box
          B&W speakers: CDM 9NT; HTM7; CDM SNT
            • Bottom

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Sounder
              SNT versus 1NT for surrounds
              by Sounder
              I'm looking for new surrounds. Currently, I have 9NTs for front, CNT center, and CDM 1SE for surrounds. I want to move the SEs to another room, and put matching surrounds. I'm interested in either the CDM 1NTs or CDM SNTs. As far as overall sound quality, what thoughts do you have on the fit for...
              08 October 2007, 12:28 Monday
            • georgev
              SCM's vs. CDM SNT's
              by georgev
              Okay time for my next upgrade.
              I run a 7.1 system. Front three are N802,s and HTM 1.
              Four rear are CDM SNT's.
              I listen to 90% two channel stereo and then Movies. Minimal MC music.
              Is it a worthwhile investment to change to the SCM's? Bearing in mind the limited information...
              14 May 2005, 10:41 Saturday
            • kmak
              CDM SNT rears.......too much?
              by kmak
              Hi Folks,

              I spotted a matching pair of CDM SNTs online. I replaced my DS6 with the identical speakers back in May. I can rearrange my receiver to run the rear surrounds, but I'm concerned that it might be overkill.

              I've attached some rudimentary camera phone pics of...
              10 December 2010, 00:36 Friday
            • DigitalKnight
              B&W CDM 7NT & CNT & 1NT
              by DigitalKnight
              I came across a set of these speakers and wanted to know if they are any good or should I say... what are some opinions of them?

              How would they compare to say Swan Diva's 5.1 speakers?

              What would be a good price to offer for the set?

              Also I take it the...
              13 April 2009, 10:58 Monday
            • rick c
              Rsx1056 and rb1050 ?
              by rick c
              I have an rb1050 just laying around right now and was contemplating adding it to my rsx1056.The rsx1056 is rated at 100x2,the rb1050 70x2.Would it even be worth the trouble adding the 1050 to the rsx1056 for the fronts.Would i notice anything being the amp is rated lower.I just hate to get to the rear...
              03 January 2008, 15:35 Thursday
            • Loading...
            • No more items.
            Working...
              Searching...Please wait.
              An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

              Please push the back button and reload the previous window.'
              An unexpected error was returned: 'Your submission could not be processed because the token has expired.

              Please push the back button and reload the previous window.'
              An internal error has occurred and the module cannot be displayed.
              There are no results that meet this criteria.
              Search Result for "|||"