RSX-1057 Advice Please!

Collapse
This topic is closed.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • deaconblues
    Junior Member
    • Mar 2006
    • 9
    #1

    RSX-1057 Advice Please!

    I'm considering ordering the RSX-1057 and would appreciate comments based on the following:

    -The main use of the receiver would be for Home Theatre.

    -My speakers consist of Klipsch SF-1 (front), Klipsch RC- 10 (center) and Mission 700LE (rear).

    -The Mission speakers are 6 ohm while the others are 8 ohm.

    Given the above info, would this be a good receiver for my needs? Are the speakers up to delivering the sound that the receiver can output?

    Thanks for your help.

    Regards,
    db
    Tags: None
      • Bottom
    • Elvis
      Senior Member
      • Jan 2005
      • 106
      #2
      Since the Klipsch need a good source you should be fine,the 1057 can easily drive large klipsch if you decide to move up later.The 1056 sounded very nice w/ref 7's.
        • Bottom

        Comment

        Previous template Next

        Related Topics

        Collapse
        • perla4u
          HDMI Output to LCD from RSX1057 not working
          by perla4u
          Dear,

          Thanks all for the great help you have provided. This forum rocks!

          A new problem and I seek your help again. I have hooked up the Bluray player to the HDMI input of the Rotel RSX1057 and an HDMI out from the receiver is connected to the LCD TV. I am able to get the...
          09 April 2009, 18:21 Thursday
        • timetohunt
          Receiver overloading on Klipsch FR-83s - Answer Fnd
          by timetohunt
          This thread more or less combines 2 other threads that I recently put out there. This is a summary and 'final answer'. Folks could not understand how my Klipshce FR83s were causing My 110w x7 VSX-816 receiver to shut down at somewhat high (but not earsplitting) listening levels (given the high effecieny...
          20 February 2007, 11:19 Tuesday
        • perla4u
          Rotel RSX1057 - LCD TV Setup Issue!
          by perla4u
          Hello to this great forum. I have been pondering quite a while reading and learning quite a bit of info here. As always, you get to a point where its very specific to your situation and here I am, requesting all for your help.

          I just bought a Samsung LCD TV (55 LED TV, very slim design...
          06 April 2009, 14:18 Monday
        • smm735
          Remote (RR-1060) no longer working with receiver (RSX-1057)
          by smm735
          I recently got a hand-me-down RSX-1057 from my father along with an RR-1060 remote but I am unable to control the RSX-1057 with the RR-1060. Both units were unused (and unpowered) for a couple of years before I started playing with them yesterday.

          Before anyone posts it, yes I have...
          07 March 2020, 11:48 Saturday
        • bullitt731
          RMB1077 and RSX1057 system
          by bullitt731
          I was planning on using an RSX1057 as a processor with an RMB1077 hooked up to a pair of B&W 804s and a HTM3s. Orignally I thought I would biamp and biwire the L and R fronts using 4 channels of the RMB1077 while using the remaining 3 channels to drive the center and back surrounds.

          ...
          08 October 2006, 15:15 Sunday
        • Loading...
        • No more items.
        Working...
          Searching...Please wait.
          An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

          Please push the back button and reload the previous window.'
          An unexpected error was returned: 'Your submission could not be processed because the token has expired.

          Please push the back button and reload the previous window.'
          An internal error has occurred and the module cannot be displayed.
          There are no results that meet this criteria.
          Search Result for "|||"