Digital or Analog with Rotel 1072 CD?????

Collapse
This topic is closed.
X
X
 
  • Time
  • Show
Clear All
new posts
  • chinets
    Senior Member
    • Jun 2005
    • 855

    #1

    Digital or Analog with Rotel 1072 CD?????

    Hi Y'all,
    What is the optimal connection for pure sounding Music with a Rotel 1072 CD equipment connected to a Rotel HT Processor?? Digital or Analog connection?????
    Thanks,
    Chinets
  • DL86
    Senior Member
    • Sep 2005
    • 271

    #2
    I dont have the 1072, but I can definatly say you should be using the analog connection for music listening. From what I have gathered a digital output will sound more clinical, whereas an analog output will have more warmth to the sound.

    David

    Comment

    • sprout
      Senior Member
      • Jun 2005
      • 136

      #3
      Originally posted by DL86
      I dont have the 1072, but I can definatly say you should be using the analog connection for music listening. From what I have gathered a digital output will sound more clinical, whereas an analog output will have more warmth to the sound.

      David
      True but always bear in mind the DACS :T

      The 1072 has good dacs, but if you have a higher quality DAC. or one you prefer, then coax out of the 1072 yo your off board DAC, then analogue to your pre :T :T
      Cheers
      sprout

      Comment

      • peterS
        Super Senior Member
        • Dec 2005
        • 1038

        #4
        why would you even go into the processor?

        Comment

        • sprout
          Senior Member
          • Jun 2005
          • 136

          #5
          Originally posted by peterS
          why would you even go into the processor?
          Well his processor may be his only preamp! so bypass or direct to amp if amp has the input

          Comment

          • grit
            Senior Member
            • Jan 2005
            • 580

            #6
            i run my 1072 in analog mode, but be sure to use analog bypass in your processor, otherwise you'll just convert the signal BACK to digital (in which case, i'd use the digital output).

            Comment

            • stewfoo
              Senior Member
              • Jul 2005
              • 275

              #7
              With the 1068 and 1072 combo that I had, the analog out/bypass combo sounded much better. No comparison. But, with my new Classe ssp-300 I am betting that it sounds better using the DACs of the ssp. Also, it will allow me to use my new Velodyne DD-18 sub. I NEED CRAZY GHETTO BASS!!!!!!
              Sorry, you can take the boy out of the ghetto. But, not the ghetto out of the boy. At least that's what my friends tell me.
              Stew

              Comment

              • DrJRapp
                Super Senior Member
                • Apr 2003
                • 1204

                #8
                Originally posted by stewfoo
                it will allow me to use my new Velodyne DD-18 sub. I NEED CRAZY GHETTO BASS!!!!!!
                Sorry, you can take the boy out of the ghetto. But, not the ghetto out of the boy. At least that's what my friends tell me.
                Then you should try a Jolida JD100A in analog mode. The JD is available for about the same street price as the 1072. It has tube final amps and a bottom end to die for.
                Jerry Rappaport

                Comment

                Related Topics

                Collapse

                • gianni
                  Rotel HT receiver and RCD-1072 users....
                  by gianni
                  Sorry this is so long, but I want to paint an accurate picture.

                  A little over a month ago I purchased a RCD-1072 to add to my RSX-1055. Prior to the 1072, I had been using a roughly 15 year old Denon DCD-1520 which at the time was one of their top of the line CD players...this thing weighs...
                  24 August 2005, 20:47 Wednesday
                • TonyStarks
                  Digital Connection: Toslink or COAX for 1098
                  by TonyStarks
                  Hey Guys,

                  Would like to get you're opinions on which would be the best direction for connecting my Denon 2900 DVD player to my RSP-1098. I want the best possible (no doubt thats what everyone wants) and I cant decide wheather to go toslink or COAX for my digital connection.
                  ...
                  16 November 2005, 18:48 Wednesday
                • chinets
                  connect 1072 in Analogue or Digital In HDCD???
                  by chinets
                  Hi Everyone,
                  When you connect a Rotel RCD 1072 which has HDCD and a Rotel Pre/Pro 1098 that has HDCD, does one have to connect the cables through Digital connection or Analogue connection to get the benefit and sound of HDCD?????
                  The Rotel 1072 does give the red light when one plays HDCD,...
                  29 April 2006, 07:40 Saturday
                • Club1820
                  Digital or Analog Connection?
                  by Club1820
                  I'm a newbie when it comes to Digital Coaxial Connections. I posed the following question to Rotel and got the following response. Was wondering your thoughts on the subject.

                  Thanks!

                  "I have a Rotel 1068 Pre/Pro and a 1055 Cd Player and was wondering how should...
                  28 November 2006, 11:53 Tuesday
                • greenhorn
                  CD Player To PreAmp Connection Options and PreAmp Configuration (sheesh)
                  by greenhorn
                  Ok so here is the deal, tuning and learning. Never really 100% on what I’m doing setting some parts of my stereo \ home theater up. Would like to set it up optimally and learn something too. In asking these questions I am very aware of a few things
                  1. Many or most specs lie.
                  2. Good...
                  03 April 2008, 15:15 Thursday
                • Loading...
                • No more items.
                Working...
                  Searching...Please wait.
                  An unexpected error was returned: 'Your submission could not be processed because you have logged in since the previous page was loaded.

                  Please push the back button and reload the previous window.'
                  An unexpected error was returned: 'Your submission could not be processed because the token has expired.

                  Please push the back button and reload the previous window.'
                  An internal error has occurred and the module cannot be displayed.
                  There are no results that meet this criteria.
                  Search Result for "|||"