I was watching TV the other night and noticed that the sound switched from my front speakers to my rear speakers abruptly. I have my 1055 set to Dolby ProLogic for TV, but I rarely get more than some ambient sound from my rear speakers. The switch didn't seem normal and after about 10 seconds, it switched back to the front channels. I've had this happen a few times and didn't know if anyone else has experienced it.
-
Christopher -
The way PL gets rear information is what's out of phase between left/right. So if the cable channel reversed phase on one of the stereo sides it would make everything come out of the rears.
Could be the 1055, but I would start making notes of times and channels that it happens and see if a pattern develops on the cable side.
Kevin D. -
Thanks for the response Kevin D. I was starting to think that everyone thought I've never heard surround sound before and I was complaining about it.
I will try your suggestion. I was hoping someone else would have experienced it b/c I don't think it is the Rotel (doesn't happen on every channel), but wanted to make sure.ChristopherComment
-
Hi,
Thanks to Glenn, Club Rotel members were made aware of an interesting article by Brian Florian in the “Secrets of Home Theatre and High Fidelity” Web site titled “The Secrets SSP (Surround Sound Processor) Benchmark Specifications”.
The link to the article is http:... -
![[c]oma](./core/customavatars/avatar13439_1.png "[c]oma")
I currently have my PC connected to my amp (Rotel RSX-1055) via an SPDIF connection to the Coaxial 1 input. I am using a Creative X-fi ExtremeMusic card and I am running windows XP x64 professional. Everything including drivers has been updated to the most recent versions. I have a stereo setup at the... -
Recently, I've had some problems with the center channel of my
RSX-1055 (completely up-to-date firmware). When I run a test tone through each speaker in my system (5.1), all of the speakers sound normal except the center channel. I have to raise the volume on the 1055 to 70+ in order to hear... -
Guess I'll start with my setup so far and what I plan to do. So far I have a pair of RP6000F's run by a Denon X3500H(7.2 / 5.2.2). I ran audyssey XT32 room calibration. Kept the XT32 room Eq. But disabled the dynamic stuff, dont really need volume control. I planned on getting pair or rp500m for surround... -
Room 15' x 39'
listening = 90% HT, 10% music
I bought a pair of N802's for the front.
I will use (future) N805 for rear.
HTM1 center.
Now, to fill the middle, N803's or N804's? The cost difference is not that much but is there much difference...
Comment