I can't switch between say Multi-input, Video 1, Video 2, etc. via the labeled buttons on the remote, am I missing something? It is annoying to have to manually switch it on the processor.
Thanks
John
Thanks
John
-
-
Does it show up on the led of the remote that you've selected another input? -
try pushing the button on the upper left that says AUD first. Perhaps the remote thinks it's addressing another device.Jerry RappaportComment
-
You are HOLDING the button down for 2-3 seconds right?
Kevin D.Comment
-
Problem solved, thanks.Originally posted by Kevin DComment
-
No problem.. Question comes up every few months or so..
Enjoy,
Kevin D.Comment
-
So i have my RSX-1057 all setup. I have my TV sending an audio signal through RCA's to Video 2 on the receiver. I can adjust the volume fine on the receiver itself, however when i hit V2 on the remote the volume buttons don't work on the remote. If I hit V1 or Aud or CD or TUN or TAPE or EXT (quick... -
Hi List - Has anyone experienced problems with the RR-1050's interoperation with the RSP-1066. I have one recurring problem - the OSD menu only comes up intermittently when the button on the RR-1050 is pressed. I am using the composite output to monitor to OSD as directed. Additionally, I switch... -
I spent part of the day programming the Rotel RR-1050 and now I'm stuck with a remote that won't give me the on screen display that I was able to view yesterday! I've tried preloading after clearing both AUD and Video 1. I've cleared all of the commands that I've entered. I've even installed new batteries!...23 November 2006, 18:45 Thursday -
Here goes my first post!
My house was just built and I didn't have the ability to change the lighting system upon build, yet I would like to add a scene controlling dimming system to my home theater/great room that also features a remote. I'm thinking about it now and I really would... -
G'day,
The line-level inputs on my 2-ch pre-amp are not selectable via remote control.
So I'm looking for a very high-quality line-level audio switch box, with remote control. The sources will plug into the switch box's inputs, and the switch box output will go to an input...
Comment