I think I know the answer, but if you have two or three video inputs, can the monitor out be sent to a video hub and seen on other displays with the main unit in standby only, or does it need to be powered on. Zone 2 will send it via composite in standby mode I believe.
-
____________________
Erik
Just another case of the man trying to keep us down! :B -
I believe the unit must be powered on, but I have never tested this option.
Regards,
Azeke -
Has to be on fro main monitor output.... zone2 outputs video even while the unit is "off" (when zone2 is active) - but its not really off - the processor is in stanby mode only... u can tell from the heat from the unit.
Rgds Steve.Comment
-
Thanks, that was my first thought, but never tried it either.____________________
Erik
Just another case of the man trying to keep us down! :BComment
-
Hello guys,
Just wondering is it Ok to leave my RSP1068/RMB1075 combo in standby mode while I am either asleep or gone to the office? I am using the 12V trigger switches on these units and thus find it a pain to be "maunally" pressing the power buttons.
I guess... -
I've owned this receiver for about 1 1/2 years now, from day one the remote control/ ir strength has been really weak. I originally set the powering up of the unit with the "direct" mode, because of the POS remote response.
I recently upgraded to a MX-500 universal remote. After... -
Hello all,
I'm having a very strange problem with passing progressive video. I assigned the DVD player (Pioneer Elite dv47a) to V2 in progressive, DVD player is set to progressive, my HDTV can except the Progressive signal. What happens is the rsp1068 will not pass the video unless I first open... -
Hi, my 4 yrs old rotel rsp1068/rmb1075 suddenly drop the right front channel yesterday. I switch the RSP1068 pre-out right and left front connection and the problem will move from right to left. So it definitely mean it is not a cable or rmb1075 amp issue. I try power cycle, unplug the power and wait,... -
I was wondering if someone can help.
I usually set my RSP-1066 on standby when I leave the house. How do you power up the unit coming from standby mode using the unit's front panel (not using the remote)?
Comment