1098 Updating Instructions

[TunerX]

So i dont want to fall victim i must ask, After updating the eprom 1-4
do i shut the 1098 down and restart and then update the software?
or can i immediatly update the software?

and after its all done i use the menu to set factory defaults then power down,toggle the power switch to off... then back on power up and reset all my settings?

oh yeah i gotta go out to the garage and drag a damn ps2 keybord out
i could not get a usb keybord to work with that program.

[PewterTA]

You do not need to shut the system down and power it back up after you install the eproms. At least I didn't and had no problems.

Once you do a factory default values reset, it will automatically power cycle itself. Once that's done you can put all your values back in (I took a picture of all my settings on my digital camera so I could easily put the settings back). However I will caution you, I had to recalibrate the speakers because my settings were off afterwards.

That should be all there is to it.